769817
14
Zoom out
Zoom in
Previous page
1/32
Next page
EN
14
If the device is not going to be used
for a prolonged period and before
storing it away, it is essential to
remove any remaining water from the
water tank (7) (see the “Cleaning the
Water Tank” chapter).
Store the device in a clean, dry place
so that it is protected and is out of the
reach of children and animals when it
is not in use.
Cleaning the Water Tank
To clean the water tank (7), it needs to be
removed from the device.
1. Make sure that the device is not con-
nected to the mains power.
2. Take the cover (10) off the main unit(5)
(Picture C).
3. Remove the splash guard (9) from the
water tank (Picture C).
4. Carefully detach the cables of the
ultrasonic atomisers(1) from the cable
guide (2) on the edge of the water
tank. Then remove the ultrasonic
atomisers from the mounts.
5. Remove the water tank from the main
unit (Picture D).
6. Pour away any remaining water.
7. Clean the water tank thoroughly with
a little detergent and warm water.
8. Completely dry the water tank.
9. Insert the water tank into the main
unit.
10. Insert the ultrasonic atomisers into
the mounts in the water tank and their
cables into the cable guide. When
you do this, make sure that the ultra-
sonic atomisers are fully inserted and
are fi tted straight.
11. Insert the splash guard into the water
tank and place the cover on the main
unit.
MAINTENANCE
The device must be kept operationally
ready. If a halogen lamp(11) or an ultra-
sonic atomiser (1) should be damaged,
they need to be replaced.
More replacement parts can
be purchased via the following
website:
www.dspro.de/kundenservice
Replacing a Halogen Lamp
Please Note: When you touch and insert
a new halogen lamp (11), use gloves or a
cloth so that you do not compromise the
way that the halogen lamp works.
1. Make sure that the device is not con-
nected to the mains power and has
cooled down completely.
2. Take the cover (10) off the main unit(5)
(Picture C).
3. Remove the splash guard (9) from the
water tank (Picture C).
4. Twist the halogen lamp anticlockwise
to release it and pull it out.
5. Insert a new halogen lamp into the
socket and twist it clockwise to fi x it
in place.
Replacing an Ultrasonic Atomiser
1. Make sure that the device is not con-
nected to the mains power and has
cooled down completely.
2. Take the cover (10) off the main unit(5)
(Picture C).
3. Remove the splash guard (9) from the
water tank (Picture C).
4. Carefully detach the cable of the
ultrasonic atomiser(1) from the cable
guide (2) on the edge of the water
tank (7). Then pull the ultrasonic
atomiser out of the mount.
5. Pull the cable out of the housing up
to the plug connection (PictureE).
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxxmee BG-E-0220 - 08827 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxxmee BG-E-0220 - 08827 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Maxxmee BG-E-0220 - 08827

Maxxmee BG-E-0220 - 08827 Additional guide - English, German, Dutch, French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info