629536

Maxview MXL011 VUDOME AUTO Manual

13
Zoom out
Zoom in
Previous page
1/24
Next page
Page 13
UK
Once your system is set up to search for the correct satellite, you are ready to scan.
To do this, simply hold down the SCAN button for 3 seconds.
The antenna will now begin to search and the SAT SCAN lights on the control box will begin
cycling to confirm this. This process can take up to 10 minutes, however in most cases will
be considerably less.
Once the VuDome Auto has located a satellite, the SAT SCAN lights will stop cycling and the
light representing the satellite programmed to search will turn solid. This confirms that the
desired satellite has been located.
Ensuring your receiver is set to the correct satellite, you will now have a picture.
If after 10 minutes the lights stop cycling and the ERROR light appears. There has been a
problem locating the satellite; there are several reasons for this such as an obstruction or
unstable surface. In this case you should re-setup your system and rescan.
Please refer to the troubleshooting guide for more information.
Note: If you move the antenna unit, you will have to re-acquire the satellites by repeating
the scan process.
DE
Halten Sie Scan-Taste für 3 Sekunden gedrückt und die VuDome - Auto startet die Suche
des gewünschten Satelliten.
Die duchlaufenden Sat-Scan LED´s bestätigen den Suchvorgang. Dieser Vorgang kann bis
zu 10 Minuten dauern in den meisten Fällen aber deutlich weniger.
Sobald das System den gewünschten Satelliten gefunden hat wird das Durchlaufen der
SAT-SCAN LED´s gestoppt. Die Sat-SCAN LED leuchtet dann an dem Satellit der gefunden
worden ist.
Vergewissern Sie sich, dass Ihr Receiver auf den richtigen Satelliten eingestellt ist, wenn
das der Fall ist haben Sie jetzt ein Bild und können fernsehen.
Ist nach 10 Minuten immer noch keiner der Satelliten gefunden worden hören die LED´s
auf sich zu bewegen und es erscheint die ERROR LED d.h. es kann der gewünschte Satel-
liten nicht identifiziert werden. Gründe hierfür sind z.B. keine frei Sicht zum Satelliten die
Signale werden geblockt von Hindernissen wie z.B. andere Fahrzeuge, Bäume, Gebäude
usw. Die VuDome wurde während des Suchvorganges bewegt oder die Standfläche ist
instabil. Bitte beachten Sie die Anleitung zur Fehlerbehebung für weitere Informationen.
Hinweis: Wenn sie die Antenne bewegen, müssen sie erneut einen SCAN-Vorgang
durchführen.
Scan/Satelliten Suche
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxview MXL011 VUDOME AUTO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxview MXL011 VUDOME AUTO in the language / languages: English, German as an attachment in your email.

The manual is 22,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info