Manual Maxview MXL011 VUDOME AUTO (page 11 of 24) (English, German)

629536

Zoom out

Zoom in

1/24





European users can also immediately search for their favourite channels.)

In most cases your pre-set satellite will be the one you wish to search for, in this case,

please skip to the SCAN section now (turn over).

If you would like to change the satellite which your VuDome Auto searches for please use

the following process:

1. Hold down POWER and SCAN simultaneously for 3 seconds or until a SAT SCAN &

COAX light begins to ﬂash.

2. 

satellites by pressing the SCAN button. You will see the SAT SCAN light will move,

corresponding to the new satellite you have selected (see table).

3. Once you have selected your satellite, again, simultaneously hold down POWER and

SCAN for 3 seconds. The lights will stop ﬂashing.

4. You have now exited satellite selection mode and your new satellite is ready to be

searched.

Note:

This will now remain the pre-set satellite on the control box until this process is repeated.

Operation

Page 11

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Maxview MXL011 VUDOME AUTO in the language / languages: English, German as an attachment in your email.

The manual is 22,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Maxview MXL011 VUDOME AUTO Manual

Product: