629532

Maxview MXL003 Seeker Wireless Manual

27
Zoom out
Zoom in
Previous page
1/34
Next page
27
Software Update
To keep your Seeker up to date with the latest satellites Maxview has incorporated a USB
port on the front of the Control Box. The Seeker has the ability to update its satellite data and
its operational software from a simple USB flash memory stick.
Please visit www.maxview.co.uk for latest software and a guide to installation.
Preparing a USB Flash Memory Stick
Use a blank USB flash memory stick formatted to FAT or FAT32
Format USB stick:
In Windows XP, Vista or Windows 7
Insert USB key in PC, find device in ‘My Computer’, right click and select ‘Format...’
Select options as shown below press start.
Update Control Box Software
1. Obtain a update-xxxx.hex file from Maxview and copy onto a formatted USB flash
memory stick.
2. Turn on Control Box.
3. Press and hold the SYNC button on the front of the Control Box for 7 seconds until
SYNC LED illuminates RED.
4. Insert the USB flash memory stick. The SYNC LED will flash GREEN whilst data is
been transferred.
5. When the SYNC LED goes out turn off the Control Box power and remove the USB
flash memory stick.
6. Turn power on, SYNC LED will flash RED and GREEN whilst data is written to
Control Box memory.
7. When SYNC LED goes out update is complete.
8. Pair Control Panel to Control Box (see page 21)
Note
If Status LED does not flash RED and GREEN when power is restored after update then the
software has not been loaded successfully. Check the readme file created by the Control
Box on the USB flash memory stick for details. An update will not be successful if the file to
be loaded is the same as the one already stored in the Control Box.
If you experience difficulties please contact Maxview customer service.
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxview MXL003 Seeker Wireless at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxview MXL003 Seeker Wireless in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info