629532
24
Zoom out
Zoom in
Previous page
1/34
Next page
24
Ignition Mode
The ignition mode is a safety feature that automatically lowers the antenna and prevents
accidental operation whilst travelling.
When the Seeker has detected an active ignition circuit in the vehicle the Control Panel will
display ‘IGNITION’. In this mode the antenna is automatically lowered and the Control Panel
function is disabled.
Note
The Control Box must be wired to a 12v DC electrical circuit that is live when the vehicle’s
ignition is on. This not only provides a safety benefit but also refreshes the Control Box
memory which allows the Seeker Wireless to perform correctly.
Connecting to a Satellite Receiver
The Seeker Wireless satellite system features a twin LNB for connection to a PVR or 2
separate receivers. One of the satellite cables must connect to the Control Box. The Control
Box will then output this signal through the F connector marked ‘RECEIVER’.
In order for the satellite signal to pass through the Control Box the power must be on.
Power Consumption
The Seeker Wireless has been designed to minimise power consumption.
When not in use the system enters a sleep mode where wireless communication between
the Control Panel and Box is suspended. This is where time and temperature are displayed
on the Control Panel.
When the Seeker is not used for long periods of time it is recommended to switch off the
Control Panel and Box. The Ignition Mode will still activate even with the Control Box power
switch in the off position.
When power is restored to the system the antenna will automatically lower into the park
position.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxview MXL003 Seeker Wireless at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxview MXL003 Seeker Wireless in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info