629532
22
Zoom out
Zoom in
Previous page
1/34
Next page
22
Finding a Satellite
Location & Set-up
Before starting check there is a clear line of sight to the southern sky. All television
broadcasting satellites have a geostationary orbit which means their location is fixed above
the earth’s equator. Satellites also have a limited range of transmission so use the Zone
maps included in the appendix to check your location is suitable for reception. If your
location is near the limit of reception it is recommended to adjust the skew angle of the LNB
to maximise signal quality and strength (see page 25 for details)
Note
The Seeker Wireless works independently from a Satellite Receiver. Therefore, any satellite
receiver can be used.
Ensure the TV and Satellite Receiver are connected in accordance to the manufacturer’s
instructions.
Starting Search Mode
1. Turn on Control Box and Control Panel
2. If Control Panel is in sleep mode displaying clock/temp press any button to wake
panel
3. Using the Change Satellite UP/DOWN Buttons select a satellite
4. Press Antenna Search button
Note
If the search button is not pressed within 3 seconds of selecting a new satellite the seeker
will revert back to the last acquired satellite.
The antenna icon will animate and SEARCH will be displayed whilst the Seeker Wireless is
searching for the chosen satellite.
When SAT FOUND is displayed the satellite has been located. After 10 seconds the Control
Panel will enter Sleep Mode and display the time and temperature.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxview MXL003 Seeker Wireless at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxview MXL003 Seeker Wireless in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info