464017
67
Zoom out
Zoom in
Previous page
1/90
Next page
Section 5 TROUBLE SHOOTING
5-11
n Windows NT 4.0 does not support infrared devices.
n Remove any objects that sit between the communicating
path.
n Make sure the communicating devices are not more than 1
meter apart and are aligned in a straight-line fashion.
n Make sure that IR device is enabled in the Control Panel. If
the infrared icon at the lower right corner of the task bar has
a red x symbol, it is being disabled. Click on the icon and in
the Option page check off the Infrared Communication item.
n Check the infrared setting in BIOS Setup utility. Go to
Section 2 BIOS Setup to find out how this is done. If you are
using Windows 95 and have enabled Fast IR option in the
BIOS Setup, you must load the vendor-specific IR driver
manually for it to work (Windows 95 comes with standard
IrDA driver only.)
Memory Problems
The POST does not show an increased memory capac-
ity when you have already installed additional memory -
n Certain brands of memory module may not be compatible
with your system. You should ask your vendor for a list of
compatible makers of the DIMM.
n The memory module may not be installed properly. Go back
to Section 4 Upgrating Your Notebook to review the details
of this operation.
n The memory module may be defective.
The O/S issues an insufficient memory error message
during operation -
n This is often a software or Windows-related problem.
n Close the application programs youre not using and restart
the system.
n Otherwise, you have to install additional memory module.
For instructions, go to Section 4 Upgrading Your Notebook.
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxdata VISION FX470T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxdata VISION FX470T in the language / languages: English as an attachment in your email.

The manual is 3,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info