Manual Maxdata platinum 3200 i (page 32 of 45) (English)

171513

Zoom out

Zoom in

1/45

32 Hardware Installations and Upgrades

Installing or Replacing the Processor

CAUTIONS

Processor must be appropriate: You may damage the server board if you install a processor that

is inappropriate for your server.

ESD and handling processors: Reduce the risk of electrostatic discharge (ESD) damage to the

processor by doing the following: (1) Touch the metal chassis before touching the processor or server

board. Keep part of your body in contact with the metal chassis to dissipate the static charge while

handling the processor. (2) Avoid moving around unnecessarily.

Installing the Processor

To install a processor, follow these instructions:

1. Observe the safety and ESD precautions at the beginning of this book.

2. Turn off all peripheral devices connected to the server. Turn off the server.

3. Disconnect the AC power cord(s) from the server.

4. Remove the chassis cover.

5. Remove the memory and processor air duct.

6. Locate the processor sockets (see Figure 20 on page 24).

7. Disconnect and remove any components necessary to access the processor sockets.

8. Push down on the lever attached to the processor socket. While holding the lever down, pull

it towards the center of the board to disengage the lever from the hook. Fully open the lever.

See Figure 24.

Figure 24. Opening Processor Socket Lever

9. Push down on the rear tab of the load plate to swing the front of the load plate up slightly. Fully

open the load plate. See Figure 25.

Figure 25. Opening Load Plate

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Maxdata platinum 3200 i in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Maxdata platinum 3200 i Manual

Product: