171513

Maxdata platinum 3200 i Manual

31
Zoom out
Zoom in
Previous page
1/45
Next page
31MAXDATA Server PLATINUM 3200 I M6
5 Hardware Installations and Upgrades
Before You Begin
Before working with your server product, pay close attention to the safety information in ‘Server
Position’ at the beginning of this manual.
Tools and Supplies Needed
• Phillips (cross head) screwdriver (#1 bit and #2 bit)
• Needle-nosed pliers
• Anti-static wrist strap and conductive foam pad (recommended)
Installing and Removing Memory
The silk screen on the board for the FBDIMMs displays DIMM_D2, DIMM_D1, DIMM_C2, DIMM_C1,
DIMM_B2, DIMM_B1, DIMM_A2, DIMM_A1 starting from the edge of the board.
Begin populating your memory with DIMM_A1 and DIMM_B1.
Installing DIMMs
To install DIMMs, follow these steps:
1. Observe the safety and ESD precautions at the beginning of this book.
2. Turn off all peripheral devices connected to the server. Turn off the server.
3. Disconnect the AC power cord(s) from the server.
4. Remove the chassis cover.
5. Remove the memory and processor air duct.
6. Locate the FBDIMM sockets (see Figure 23 on page 29).
7. Make sure the clips at either end of the FBDIMM socket(s) are pushed outward to the open
position.
8. Holding the FBDIMM by the edges, remove it from its anti-static package.
9. Position the FBDIMM above the socket. Align the small notch in the bottom edge of the
FBDIMM with the key in the socket.
10. Insert the bottom edge of the FBDIMM into the socket.
11. When the FBDIMM is inserted, carefully push straight down on the top edge of the FBDIMM
until the retaining clips snap into place. Make sure the clips are firmly in place.
12. Reinstall the memory and processor air duct.
13. Replace the chassis cover and reconnect the AC power cord(s).
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxdata platinum 3200 i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxdata platinum 3200 i in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info