169742

Maxdata platinum 220 select Manual

19
Zoom out
Zoom in
Previous page
1/31
Next page
18 Server Description
19MAXDATA PLATINUM 220 Server
The Server Board S875WP1-E supports sleep states S0, S1, S2, S3, S4, and S5. When the server
board is operating in ACPI mode, the operating system retains control of the system and the operating
system policy determines the entry methods and wake-up sources for each sleep state. Sleep entry
and wake-up event capabilities are provided by the hardware but are enabled by the operating system.
The following is a summary of the supported sleep states:
• S0: Normal running state.
• S1: Processor sleep state. No context will be lost in this state and the processor caches will
maintain coherency.
• S3: Suspend to RAM (Instantly Available PC Technology).
• S4: Hibernate or Save to Disk. The memory and machine state are saved to disk. Pressing the
power button or another wake-up event restores the system state from the disk and resumes
normal operation. This state assumes that no hardware changes were made to the system
while it was off.
• S5: Soft off. Only the RTC section of the chipset is running in this state.
CAUTION
The system is off only when the AC power is disconnected.
Table 7 lists the system states Based on how long the power switch is pressed, depending on how
ACPI is configured with an ACPI-aware operating system.
Table 7. Effects of Pressing the Power Switch under ACPI
If the system is in this
state…
…and the power switch is
pressed for
…the system enters this state
Off
(ACPI S5 – Soft off)
Less than four seconds Power-on
(ACPI S0 – working state)
On
(ACPI S0 – working state)
Less than four seconds Soft-off/Standby
(ACPI S1 – sleeping state)
On
(ACPI S0 – working state)
More than four seconds Fail safe power-off
(ACPI S5 – Soft off)
Sleep
(ACPI S1 – sleeping state)
Less than four seconds Wake-up
(ACPI S0 – working state)
Sleep
(ACPI S1 – sleeping state)
More than four seconds Power-off
(ACPI S5 – Soft off)
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxdata platinum 220 select at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxdata platinum 220 select in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info