169742
10
Zoom out
Zoom in
Previous page
1/31
Next page
10 Server Description
11MAXDATA PLATINUM 220 Server
Processor
The S875WP1-E server board supports a single Intel
®
Pentium
®
4 processor with an mPGA478 socket.
The processor connects to the server board through the mPGA478 socket. The Intel
®
Pentium
®
4
processor can be removed and replaced to accommodate a supported higher speed processor.
The server board S875WP1-E supports the following processors.
Table 2. Supported Processors
Type Designation System Bus L2 Cache
Size
Pentium
®
4 processor with Hyper-
Threading (HT) Technology
2.40, 2.60, 2.80, and 3.0 GHz 800 MHz
512 KB
3.06 GHz 533 MHz
512 KB
Pentium
®
4 processor 2.0, 2.26, 2.4B, 2.53, 2.66 and
2.80 GHz
533 MHz
512 KB
2.0, 2.4 GHz 400 MHz
512 KB
Memory
The S875WP1-E server board contains four 184-pin DIMM sockets and supports up to four DDR
SDRAM DIMMs. The minimum supported memory configuration is 128 MB and the maximum
configurable memory size is 4 GB with stacked unbuffered DDR266/333/400 ECC DIMMs.
Supported memory configurations are as follows:
Up to four dual-channel 184-pin Double Data Rate (DDR) SDRAM DIMMs connectors with gold-plated
contacts. Supported memory configuration are:
1. DDR400: To run DDR400 memory at full speed requires an Intel
®
Pentium
®
4 processor with
800 MHz front side bus (FSB) frequency.
2. DDR333: To run DDR333 memory at full speed requires an Intel
®
Pentium
®
4 processor with
533 MHz FSB frequency. DDR333 memory will run at 320 MHz frequency when using an
Intel
®
Pentium
®
4 processor with 800 MHz FSB frequency.
3. DDR266: DDR266 memory may only be used with an Intel
®
Pentium
®
4 processor with
400 MHz or 533 MHz FSB frequency only.
Support for:
1. Single-channel memory.
2. Unbuffered, single or double-sided DIMMs.
3. Serial Presence Detect (SPD) memory only.
4. Support for Suspend to RAM (STR), S3 ACPI state.
5. ECC and non-ECC RAM.
6. 2.5V memory.
Support for 128 MB, 256 MB, and 512 MB memory technologies for the following memory configu-
rations:
1. Up to 1.0 GB utilizing 128 MB technology.
2. Up to 2.0 GB utilizing 256 MB technology.
3. Up to 4.0 GB utilizing 512 MB technology.
Only DIMMs tested and qualified by Intel
®
or a designated memory test vendor will be supported
on the board. Note that all DIMMs are supported by design, but only fully qualified DIMMs will be
supported. Mixed mode DDR DS-DIMMs (x8 and x16 on the same DIMM) is not supported.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxdata platinum 220 select at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxdata platinum 220 select in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info