761884

Maxcom MM29D 3G Manual

19
Zoom out
Zoom in
Previous page
1/41
Next page
19
6.8 Powering On/Off the Phone
Plug in the battery and the AC adapter, and then press the key ON/OFF.
A LCD screen should backlight. If there is a battery installed, the battery
icon will be displayed on the LCD. If there is only the AC adapter plugged
in, only a symbol of a plug will appear on the screen.
As soon as the phone is switched on, an input text box will appear on
the screen for you to enter the PIN Code (if securities are enabled). After
the PIN Code is entered, the phone will go into Idle mode.
Any errors while entering the PIN Code might be deleted by pressing the
key BACK.
As soon as the phone is switched on, it will automatically search for a
network.
As soon as an authorized network is found, the network’s name and its
signal will appear on the screen. If there is no network found, only
emergency calls might be made, or non-communication features used.
To switch off the phone, press and hold the key ON/OFF.
6.9 Charging the Battery
It is recommended to use power through the AC Adapter while using the
phone. Built-in battery is to be used as an emergency supply in case of
power blackout.
1. Plug in the charger into the power outlet.
2. Plug in the charger wire into the jack on the top side of the phone.
As soon as the charger is correctly connected, a battery symbol will
blink on the LCD until the battery is fully charged.
As soon as the battery is discharged, the phone will automatically switch
off. Do not leave a battery discharged for a long time, doing so might
negatively impact its quality and battery life. To make sure the phone
works properly, use only a charger recommended by the Manufacturer.
6.10 Security Codes
6.10.1 PIN Code
It is a Personal Identification Code of the SIM Card provided by the
service provider. PIN2 Code is provided by the service provider along
with SIM cards. Some SIM cards do not support such a code.
Downloaded from www.Manualslib.com manuals search engine
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxcom MM29D 3G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxcom MM29D 3G in the language / languages: English as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info