545558
102
Zoom out
Zoom in
Previous page
1/133
Next page
SFX SERIES USER’S GUIDE
Rev 2.2 100
The Ping command is assembled right on the Ping page, by entering the following information:
Ping Field Description
Packet Count The number of ping packets to transmit to the host. If this field is left blank, or a value of > 1000
is specified, the receiver will send out 10 packets.
Packet Size This is the size of the ping packet, in bytes. Up to 65507 byte packets can be transmitted. The
lower limit is 1 byte for SFX series receivers.
Host IP The IP address of the host on the network that you wish to ping. The address is in dotted
decimal notation (e.g. 192.168.0.1).
Once the Ping command has been assembled using the fields above, it can be sent out, by selecting the PING button.
This effectively sends an ICMP Echo message of size set by Packet Size to the Host IP, for the number of times set in
the Packet Count field. Packets returned from the host, if accessible on the network, will be in the form of ICMP Echo
Reply messages. A display similar to Figure 2- 76 will show the results of the Ping operation. After the results have
been displayed, the provision is made for you to enter another Ping command right away.
Figure 2- 76 Ping Page with Results
Restart Receiver
This submenu allows you to perform a warm reboot/restart of the receiver. The Restart Receiver page similar to Figure
2- 77 will be displayed when the submenu item is selected. Instructions and warnings are provided on the page.
102


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Max SFX Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Max SFX Series in the language / languages: English as an attachment in your email.

The manual is 4,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info