545558
10
Zoom out
Zoom in
Previous page
1/133
Next page
SFX SERIES USER’S GUIDE
Rev 2.2 8
Connector Description
POWER ON Button This button is provided for emergencies only, in the event the motherboard in the
receiver needs to be power cycled. Normally, the receiver automatically starts up
without having to touch this power button. Generally, the button needs to be pressed
briefly to turn the unit on, and held for up to 4 seconds to turn the unit off.
(IEEE) 1394 Interface This interface is not used on the SFX3101, but is available for future use.
AUDIO Ports (LI, LO,
MIC, SPDIF)
These are standard unbalanced audio ports: Line Input (LI), Line Output (LO) and
Microphone input (MIC), as provided by the internal AC97 compliant codec. A SPDIF
digital interface is also provided.
PCI Option Slot One PCI option slot is provided for optional PCI cards.
L-BAND This is a 75 ohm, F-type connector that permits connection to the LNB and antenna.
An RG-6 or similar cable of less than 200 feet is recommended. High quality cabling
may be used to provide additional shielding, lower loss or protection from harsh
environments. Direct Current (DC) power is provided to the LNB at either 13 VDC or
18 VDC at 500 mA maximum.
ETHx Ethernet Ports (2) These are bi-directional RJ-45 8-wire (female) connectors, with one 10/100Base-T
auto sensing Ethernet interface and one 10/100/1000Base-T (gigabit Ethernet)
interface. Two status indicators are provided immediately above each RJ-45
connector, as follows:
For the 10/100/1000Base-T interface indicators:
Off/Green/Red (left) – indicates Link speed. Off indicates that the Ethernet interface
is in 10Base-T mode, Green indicates that the Ethernet interface is in 100Base-T
mode, and Red Indicates that the Ethernet interface is in 1000Base-T mode.
Off/Yellow (right) – indicates link status and transmit/receive data activity. Off
indicates that there is no Ethernet link, yellow indicates a valid Ethernet link. Flashing
yellow indicates that there is data activity.
For the 10/100Base-T interface indicators:
Off/Yellow (left) – indicates Link speed. Off indicates that the Ethernet interface is in
10Base-T mode, Yellow indicates that the Ethernet interface is in 100Base-T mode.
Off/Green (right) – indicates link status and transmit data activity. Off indicates that
there is no Ethernet link, green indicates a valid Ethernet link. Flashing green
indicates transmit data activity.
The pinouts for these ports are as follows:
PIN Acronym Reference
1 T+ Transmit Data +
2 T- Transmit Data -
3 R+ Receive Data +
4 Not connected
5 Not connected
6 R- Receive Data -
7 Not connected
8 Not connected
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Max SFX Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Max SFX Series in the language / languages: English as an attachment in your email.

The manual is 4,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info