472805

Mavic Wintech USB Manual

10
Zoom out
Zoom in
Previous page
1/26
Next page
9
10.4.2. Choose the bike number you wish to set up the wheel circumference and
distance unit for.
Briey press the left button (BPL) to change from BK 1, to BK 2 to BK H (for home trainer).
Briey press the right button (BPR) to validate your selection and switch to the wheel
circumference set up screen. The rst wheel circumference of the selected bike ashes.
10.4.3. Set up the wheel circumference of the selected bike.
Briey press the left button (BPL) to set up the rst digit of the chosen bike wheel circumference.
Briey press the right button (BPR) to validate your choice and move to the next digit.
Repeat those steps to the 4
th
digit. Validating the 4
th
digit by a brief press on the right button
(BPR) will move you to the distance unit setting screen. The distance unit display ashes.
10.4.4. Select the distance unit of the selected bike.
Briey press the left button to select kilometres (KM) or Miles (Mi).
Briey press the right button (BPR) to validate your selection and exit the wheel circumference
and distance unit set up menu. You will automatically return to the last active display.
Choosing the distance unit (Km or Mi) automatically updates the elevation (m or ft) and
temperature unit (°C or °F) according to the metric or imperial measurement standard.
To set up the wheel circumference and distance unit for a 2
nd
bike sensor or the home trainer
sensor, proceed again to the operations described above, selecting the correct bike number.
10.5. Clock set up
Enter the Clock set up menu:
From any active display, press and
hold the right button (BPR) for 6
seconds.
– On Wintech USB Ultimate, briey
press the left button (BPL) 4
times to move to the clock set
up section. The current clock is
displayed on the screen.
– On Wintech USB Alti and
Wintech USB HR, briey press
the left button (BPL) 3 times to
move to the clock set up section.
The current clock is displayed on
the screen.
– On Wintech USB, briey press
the left button (BPL) twice to
move to the clock set up section.
The current clock is displayed on
the screen.
Briey press the right button
(BPR) to start the clock settings
operations. The rst hour digit
ashes.
Briey press the left button (BPL)
to adjust the rst hour digit. Briey
press the right button (BPR) to
validate your choice and move to
the next digit.
Repeat those steps to the 2
nd
minute digit. Validating the 2
nd
minute digit by a brief press on the
right button (BPR) will exit the set
up menu and switch back to the
last active screen.
10.5
6 sec.
4 click (Ultimate)
3 click (Alti, HR)
2 click (USB)
1 click
1 click
1 click
1 click
1 click
any
screen
select
select
select
select
EXIT
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mavic Wintech USB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mavic Wintech USB in the language / languages: English as an attachment in your email.

The manual is 5,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info