472805

Mavic Wintech USB Manual

8
Zoom out
Zoom in
Previous page
1/26
Next page
7
To pair a 2
nd
bike sensor or the home
trainer sensor, proceed again to
the operations described above,
selecting the correct bike number
and corresponding sensor.
Heart Rate belt and cadence sensor
does not need to be paired again
when pairing a new sensor.
Digital pairing operations must be
performed after changing a battery.
– If you change the computer battery,
all sensors (speed, cadence and
heart rate belt) must be paired
again.
– If you change the battery of
only one of the sensors (speed,
cadence or heart rate belt), only
the pairing of this sensor needs to
be performed again.
After each pairing operation, ATM,
DST, AV, MAX, VS, Hi/Lo elevation
will be reset to 0.
Automatic detection of the speed
sensor (Mavic patent pending)
All paired sensor will automatically
be recognised when in use: the
BK display will ash, indicating it is
acquiring a new speed sensor signal.
When it is done, the BK display stops
ashing and the recognised sensor
numbers appears next to it.
This operation takes about 15
seconds.
Specic wheel circumferences
and odometers are linked to each
speed sensor. The computer
automatically adapts odometer and
wheel circumference according to
the detected speed sensor (see
part 10.4 and 10.6 of this user guide
to adjust wheel circumference
and odometer of each sensor/bike
number).
10.3. Elevation set up
(Wintech USB Alti and Wintech USB Ultimate only)
The elevation set up menu is divided in 3 parts:
– Elevation unit set up
– Home altitude set up
– Temperature unit set up
10.3.1. Enter the Elevation set
up menu:
From any active display, press and
hold the right button (BPR) for 6
seconds.
– On Wintech USB Ultimate, briey
press the left button (BPL) twice
to move to the Elevation set up
section.
– On Wintech USB Alti, briey
press the left button (BPL) once
to move to the Elevation set up
section.
Briey press the right button (BPR)
to start the Elevation settings
operations.
10.3.2. Choose the elevation
unit (meter or feet).
As a result from the last brief press
on the right button (BPR), the
logo appears, and “m” ashes.
Briey press the left button to
change from meters (m) to feet (ft).
Briey press the right button to
validate your choice and move to
the next Elevation setting.
Choosing the elevation unit
(m or ft) automatically updates
the temperature (°C or °F)
and distance unit (km or mi)
according to the metric or imperial
measurement standard.
10.3.3. Set up your home elevation.
As a result from the last brief press on the right button (BPR) to validate the elevation unit, you
enter the home elevation (Ho) screen set up. The rst digit of the home elevation ashes.
Briey press the left button (BPL) to set up the rst digit of your home elevation. Validate by
briey pressing the right button (BPR) and move to the next digit.
Repeat those steps to the 4
th
digit. Validating the 4
th
digit by a brief press on the right button
(BPR) will move you to the last Elevation setting.
6 sec.
1 click
1 click 1 click
1 click
any
screen
1 click
select
Cadence Option
Smart Cadence Option
1. Press
2. Shake
1 click
1 click
10.2.2
10.3.1 10.3.2
10.3.3
10.3.4
6 sec.
1 click
1 click
1 click
1 click
1 click
1 click
1 click
any
screen
2 click (Ultimate)
1 click (Alti)
select
select
select
select
select
select
EXIT
EXIT
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mavic Wintech USB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mavic Wintech USB in the language / languages: English as an attachment in your email.

The manual is 5,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info