785685
23
Zoom out
Zoom in
Previous page
1/27
Next page
EN / Mass Sine Ultra
23
7 COMMISSIONING, DECOMMISSIONING
7.1 Commissioning
CAUTION!
Check the polarity of all wiring before
commissioning: plus connected to plus (red
cables), minus connected to minus (black
cables).
The DIP-switches must be adjusted prior to
commissioning; see chapter 6.
Follow the steps described below to switch on the Mass Sine
Ultra.
1 Tighten all strain reliefs;
2 Check all wiring and connections;
3 Close the front cover plate of the connection
compartment;
4 Place the DC-fuse(s) of the DC-distribution to connect
the batteries to the Mass Sine Ultra.
WARNING
When placing this fuse, a spark can occur,
caused by the capacitors used in the Mass Sine
Ultra. This is particularly dangerous in places with
insufficient ventilation, due to the gassing of the
batteries an explosion can occur and avoid
having flammable materials close by.
Now the Mass Sine Ultra is ready for operation.
7.2 Decommissioning
If it is necessary to put the Mass Sine Ultra out of operation,
follow the instructions in order of succession as described
below:
1 Move the Main-switch of the Mass Sine Ultra to “Off”;
2 Remove DC-distribution fuses and/or disconnect the
batteries;
3 Open the connection compartment of the Mass Sine
Ultra;
4 Check with a suitable voltage meter whether the input
and the output of the Mass Sine Ultra are voltage free;
5 Disconnect all the wiring.
Now the Mass Sine Ultra can be demounted in a safe way.
7.3 Trouble shooting
If a failure occurs, the origin of the failure is displayed by
means of the LEDs at the front of the Mass Sine, see figure
7-3.
Figure 7-3: Error LEDs
The table at section 7.3.1 shows the meaning of the error
indications and their solutions, together with other directions.
If you cannot solve a problem using this table, contact your
local Mastervolt Service Centre. See www.mastervolt.com.
Make sure you have the following information present if you
have to contact your local Mastervolt Service Centre to solve
a problem:
Article and serial number (see section 1.7).
Software version (see summary page in MasterAdjust or
the Configuration page in MasterView control panel).
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mastervolt Mass Sine Ultra 24 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mastervolt Mass Sine Ultra 24 4000 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4.11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info