785685
21
Zoom out
Zoom in
Previous page
1/27
Next page
EN / Mass Sine Ultra
21
6.2 MasterBus configuration
Parameters below can be changed via the MasterBus network. See applicable user’s manuals for details. DIP switch settings
overrule MasterBus settings. If DIP switches are not set to default, the corresponding MasterBus configuration is greyed out.
Value
Meaning
Default
Adjustable range
Device
Language Language that is displayed on a
monitoring device connected to the
MasterBus.
English English, Nederlands, Deutsch,
Français, Castellano, Italiano,
Norsk, Svenska, Suomi, Dansk
Name Name of this particular device in
MasterBus. This name will be recognized
by all devices that are connected to the
MasterBus network.
MSU [Serial
number]
All names with a maximum of 12
characters.
Lock config Option to lock the configuration (installer
login).
Not checked Not checked, Checked
Factory settings Option to reset the configuration to
default (installer login).
Not selected Not checked, Selected
System
MasterBus power Checkbox to have the Mass Sine Ultra
power MasterBus or not.
Checked Checked, Not checked
Inverter
Voltage
AC voltage.
230 V
180-260 V
Frequency
AC frequency.
50 Hz
50 Hz, 60 Hz
Energy save mode
Option to enable Energy save mode.
Not checked
Not checked, checked
Scanning below The Mass Sine Ultra starts scanning
below this inverted power level in Energy
save mode.
10 W 10-250 W
Battery type Select the battery type. Flooded (Lead acid
wet cell)
User defined, Flooded, Gel, AGM,
Spiral, MLi, Flooded traction, Nickel
Cadmium
The below dynamic DC window is
configurable when Battery type is
User defined. Refer to section 3.4.4.
DC high off
High battery voltage for inverter switch off
32.00 V
26.00-32.00 V
DC high on High battery voltage for inverter switch on
after DC High Off alarm.
29.00 V 26.00-32.00 V
DC low off I=0% Low battery voltage at which the inverter
switches off when the battery current is
0-2% of nominal.
22.00 V 19.00-26.00 V
DC low off I=2% Low battery voltage at which the inverter
switches off when the battery current is
2% of nominal.
21.00 V 19.00-26.00 V
DC low off 100% Low battery inverter switch off voltage,
batt. current 100%.
19.00 V 19.00-26.00 V
DC low on Low battery inverter switch on voltage at
DC Low off alarm.
24.00 V 20.00-26.00 V
DC low off delay Delay time before inverter switches off on
a low battery voltage.
30 s 0-30 s
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mastervolt Mass Sine Ultra 24 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mastervolt Mass Sine Ultra 24 4000 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4.11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info