785585
9
Zoom out
Zoom in
Previous page
1/20
Next page
OPERATION
EN / GMDSS Mass Charger Alarm Interface / January 2013 / Copyright © 2013 Mastervolt 9
F16: Restore charger and GMDSS to factory settings
Hold the Mute button pressed for three seconds to
restore the factory settings
F17: Test alarm
With this function you can check the correct operation of
each alarm function and to test the audible alarm. Press
the Mute button to simulate below mentioned alarm
functions step by step.
0 = Test mode disabled (factory setting)
1 = Test Audible alarm
2 = Test DC voltage alarm,
3 = Test Charger alarm
4 = Test AC mains alarm
F18: LCD Contrast
To adjust the contrast of the display, press the Mute
button.
RETURN
If you want to exit the Install menu to return to the Main
Menu, hold the Select button pressed until you return.
Else press the Select button shortly to return to F0: Lock
all setting
3.4 ALARMS
See also section 4.5 for battery charger
settings.
3.4.1 Alarms handling
If one of the below mentioned alarm functions is triggered,
the audible alarm will be activated and the corresponding
relay contact will be activated. The origin of the alarm is
made visible by means of the status LED’s.
DC Status.
The battery voltage is out of range. Possible causes:
Battery voltage is below the Low Battery Alarm On
level (F8)
Battery voltage is above the High Battery Alarm On
level (F10)
Charger
The battery charger is not working properly. Possible
causes:
Battery sense error
Charger temperature too high
Short circuit at the DC-output of the battery charger
Temperature sense error
Communication cable between battery charger and
GMDSS Interface not connected
AC Mains
An AC Mains alarm may indicate:
No AC present at the AC input of the battery charger.
Battery charger is switched off by means of the
ON/OFF switch on the battery charger
3.4.2 Mute the audible alarm
The audible alarm is muted by pressing the mute button.
A new event will reactivate the alarm sound. The display
will show the alarm status.
3.5 MAINTENANCE
For a reliable and optimum function of the GMDSS
Interface, the following is required:
Check at least once a year if all cable and wire
connections are still firmly connected.
3.6 PROBLEM SOLVING
Refer to section 5 if a problem occurs
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mastervolt GMDSS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mastervolt GMDSS in the language / languages: English as an attachment in your email.

The manual is 0.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info