Manual Masterpro BGMP-9131 (page 21 of 95) (English, German, French, Italian, Portuguese, Spanish)

797866

Zoom out

Zoom in

1/95

MOVE THE UNIT OR OPEN THE LID.

15. At completion of the cooking cycle, the Unit will “beep” and enter Keep Warm mode until

manually cancelled by pressing the Cancel Button.

NOTE: Foods kept at Keep Warm mode for longer than 6–8 hrs. may lose their flavor and texture

and can be a food concern.

NOTE: When using the Keep Warm setting, when the cooking cycle is complete, the screen will

remain Red until the temperature drops to the Keep Warm holding temperature (160° F). Then, the

screen will turn Blue.

16. Open and remove the Lid by moving the Steam Release Switch to the Open position and then

letting go. The Pressure Release Valve should move from the Closed position to the Open position

(see Fig. H), releasing pressurized steam. Next, grab the handle and twist the Lid clockwise

approximately 30°.

If pressure and steam are being released, should wait until all the pressure and steam are released

before trying to open the Lid. Do not force the Lid open until all the pressure is released, which may

take several minutes.

4. Remove the Lid. Ensure the Inner Lid gaskets are in place. Place the Inner Lid Outer Gasket

around the outside of the Inner Lid and the Inner Lid Center Gasket in the center hole. Make sure the

float valve and gasket are in place in the lid (see ASSEMBLY INSTRUCTIONS).

5. Place the Inner Pot in the Base. Pour 2 cups (473 mL) of water in the Inner Pot.

6. Attach the Power Cord to the Unit Base first, and into wall outlet (see the ATTACHING THE

POWER CORD)a. When the Unit is first plugged in, “---- ” will appear on the LED Display. The Unit is

automatically “ON” when plugged in.

7. ATTACHING LID: With the LCD Display facing you, placing the Lid on the Unit, aligning the Lid

Position Mark with the Open Mark (see Fig. C). Twist the Lid counterclockwise about 30° (see Fig.

D). When the Lid is locked, the Release Switch will move to the Closed position.

8. The Magnetic Safety Sensor assures Lid is properly closed before the Unit can pressurize. If Lid is

not on correctly when starting a cooking cycle, a beeping sound will occur and the word “LID” will

appear on the display that indicate Lid is not fully closed.

9. Once Lid is properly closed, select the Canning Button on the Panel. Turn the Program Dial to the

left to select the Low setting and then press the Program Dial to confirm the setting, and will set a

10-min. cooking time automatically. The LCD Display will turn orange while pressure builds in the

Unit and will turn red when the pressure level is achieved.

CAUTION: DO NOT ATTEMPT TO OPEN LID WHEN LCD DISPLAY IS ORANGE OR RED.

10. SAFELY RELEASE PRESSURE: Once the cycle is done, the Unit will beep. Press the Cancel

Button and move the Release Switch from the Closed to the Open position and release. Allow all

pressure to escape from cooker. You will notice a slight incline of the Pressure Release Valve while

pressure is being released.

WARNING: Keep body (face, arms, torso) away from Pressure Release Valve area when

operating the Release Switch to avoid being exposed to the steam released from the valve.

Follow these safety precautions when releasing pressure to prevent serious injury.

11. Allow the water in Inner Pot to cool. Remove and empty the Inner Pot. Rinse and towel dry.

WARNING: DO NOT LIFT BASE TO REMOVE CONTENTS from Inner Pot. Do not lift the Inner Pot

from the Base when contents are hot.

NOTE: Do not use metal utensils in the Inner Pot.

WARNING: PREVENT BURNS! DO NOT TOUCH STAINLESS STEEL EXTERIOR. ONLY USE

BLACK HANDLE ON LID TO OPEN. CONTENTS IN COOKER ARE HOT. ALWAYS OPEN LID

AWAY FROM FACE AND BODY.

FIG. C

(Open Position)

FIG. D

(Locked Position)

B. OPERATING INSTRUCTIONS

Pressure Slow Cook

Air Fry

Canning

Yogurt

Delay Timer

Sous Vide

Steam

Saute

Timer

Temp Keep Warm

IMPORTANT: Pressing the Cancel Button to stop

any function immediately

1. Review PREPARING FOR USE to be comfortable

with the Unit.

2. Place the One Touch Quick Pot on a clean, flat

surface.

3. Attach Condensation Collector to side of the Unit

(see Fig. B).

4. Attach the Power Cord first into the One Touch

Quick Pot and then into a wall outlet (see ATTACH-

ING THE POWER CORD). When the Unit is first

plugged in, “----” will appear on the LED Display. The

Unit automatically powers on when plugged in.

5. Open the Lid by sliding and release of the Steam

Release Switch from the Closed position to the Open

position. Then, grab the handle and twist the Lid

clockwise to open the Lid see OPEN LID in

PREPARING FOR USE.

6. Place the Inner Pot in the Base. Add ingredients to Inner Pot. NEVER LOAD INNER POT ABOVE

THE FULL CUP LINE (see IMPORTANT SAFEGUARDS).

7. ATTACHING LID: With the LCD Display face to you, place the Lid on the Unit, aligning the Lid

Position Mark with the Open Mark (see Fig. C). Twist the Lid counterclockwise about 30° (see Fig. D).

When the Lid is locked, the Release Switch will move to the Closed position (see Fig. E).

8. SELECT COOKING MODE: You can select a preprogrammed setting (see part A). The LCD Display

will turn blue when a program is selected (see Fig. I).

9. SELECT COOKING TIME: When a cooking preset button is pressed and a food type is selected, the

LCD Display will show the default cooking time for that preset.

Some cooking presets feature multiple cooking options. Turn the Program Dial to the left or right to

choose a preset subcategory. (see part B). Press the Program Dial to select the subcategory.

10. Turn the Program Dial to the left or right to switch between LOW, MED, or HIGH cooking settings

and press the Program Dial to select (see part C).

11. Alternatively, select the Timer (see part D) and Temperature (see part E) Buttons to manually adjust

the cooking time and temperature for most presets.

12. LCD Display will turn orange when cooking time and temperature have been confirmed (see Fig. J).

13. USE DELAY TIMER: The Delay Timer lets you delay the beginning of the cooking cycle. To use the

Delay Timer, select a cooking time and temperature. Instead of pressing the Program Dial to confirm

the time and temperature, press the Delay Timer Button. Then, use the Program Dial to select the

desired time delay and press the Program Dial to confirm the setting.

NOTE: Do not recommend using a delay time of more than 2 hrs.

14. For pressure cooking settings, once the inside of the One Touch Quick pot has reached the

pressure level, the LCD Display will turn red (see Fig. K).

NOTE: DURING THIS TIME OR ANY TIME DURING THE COOKING CYCLE, DO NOT ATTEMPT TO

INSTRUCTION FOR USE

A. PREPARING FOR USE

CHECK PARTS & ACCESSORIES

1. Before using, remove all the parts and accessories from package and ensure all parts have been

included before discarding any packaging materials. Remove all packing materials such as plastic

film, cardboard, and stickers on the Pressure Release Valve and Condensation Collector (see

PARTS & ACCESSORIES).

2. CLEAN INSIDE: Remove the Inner Lid from Lid by pulling metal knob. Remove Rubber Gaskets

from Inner Lid (see INNER LID ASSEMBLY). Wash Inner Lid, Rubber Gasket, Inner Pot, and other

loose accessories with warm, soapy water, rinse and dry.

NOTE: Ensure to replace Rubber Gaskets (see CHANGING THE INNER LID RUBBER GASKETS

AND FLOAT VALVE ASSEMBLY sections) before reinstalling Inner Lid.

CONDUCT TEST RUN WITH WATER ONLY

1. To check that the Unit will operate properly, it is recommended to periodically check its operation

without cooking food.

2. Place the One Touch Quick pot on a clean, flat surface.

3. Attach Condensation Collector to side of the Unit by sliding it into the slots (see Fig. A).

NOTE: The Condensation Collector may be preas- sembled.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Masterpro BGMP-9131 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2.1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Masterpro BGMP-9131 Manual

Product: