614265
208
Zoom out
Zoom in
Previous page
1/285
Next page
Care and Maintenance • 2014 MasterCraft Owners Manual Page 6-15
C A R E A N D M A I N T E N A N C E
Before Each Use
Before the engine has been started:
• Review the engine manual before each
outing to determine the drive train re-
quirements that need to be followed
prior to each use.
• ReviewtheSafety Checks and Services
section of this Owners Manual. There
are important functions that must be
followedbefore,duringandafterevery
outing, without fail!
• Inspect the raw water intake water
strainerforblockage. If there is block-
age, also check the transmission cooler
(where equipped).
• Check and clean as necessary the sea-
cock strainer.
• Check the cooling system level (fresh
watercooling-equippedboatsonly).See
the engine owners manual for details.
• Inspectthebatteryconnectionsandhold-
downs.
• Inspectthedrivetrainforlooseormiss-
ing hardware.
• Inspect the throttle and shift cables for
kinks, wear and interference with other
components.
• Inspectthepropellershaftlogforexces-
sivewaterentry.
• Inspectthefuelsystemlinesandconnec-
tions for leaks.
• Check for water leaks or excessive ex-
haust odor.
As you start the engine:
• Checkthatthevoltagereadingregisters
afullychargedbattery.
After Each Use
• Refer to the Cleaning the Boat and
Corrosion Prevention sections of this
Owners Manual for guidance on a thor-
oughapproachtomaintenance.Alsopay
attention to the information provided
regarding the maintenance of teak plat-
forms and accessories because the wood
requires periodic maintenance as well.
• Boatsequippedwithanoptionalushing
systemforuseinsaltwaterorbrackish
water should operate the ushing sys-
tem.
Quarterly (Every Fifty [50] Hours)
Before the engine has been started or af-
ter it has cooled:
• Checkthesafetyequipment.
Annually – (Every One Hundred
[100] Hours)
Note: MasterCraft recommends that
the following be performed by autho-
rized MasterCraft technicians at an au-
thorized MasterCraft dealer.
Before the engine has been started or af-
ter it has cooled:
Replacethefuellter(tobeperformedbyan
authorizedMasterCrafttechnicianonly).
• Checkthepropellershaftcoupleralign-
ment.
• Lubricatethesteeringsystem.
• Lubricatethethrottleandshiftcables.
• Checktheenginemounts.
• Inspect the complete fuel system for
leakage.
• Checkthereextinguisherandsuppres-
sion units on-board.
Details follow in the next few sections.
MasterCraft recommends that many
of these functions be performed by au-
thorized MasterCraft technicians at an
authorized MasterCraft dealer!
208


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mastercraft X46 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mastercraft X46 in the language / languages: English as an attachment in your email.

The manual is 5,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info