614265

Mastercraft X46 Manual

125
Zoom out
Zoom in
Previous page
1/285
Next page
Page 4-16 2014 MasterCraft Owners Manual • Boat Operations
top deck sides of the bow, and aft near
the transom. Some larger models also
have mid-ship cleats. Some cleats are
elevated slightly above the deck while
others are pop-up cleats that t ush
with the deck when not in use.
Operation:
Use marine-grade lines to loop over
the cleat and tie up to the dock, allow-
ing some slack in the rope. If there is
any motion in the body of water, Mas-
terCraft recommends also purchasing
“fenders” from an aftermarket supplier
to provide a cushion between the boat
and the dock. Without a cushion, the
boat’s nishes–gel coat and graphics–
can be damaged. Such damage is not
covered under warranty.
The boat should be tied to docks with ma-
rine-grade lines ONLY to the cleats, and al-
lowing some slack. Never tie-up the boat to
the tower, mirror, seats or any other part of
the boat. If the ability exists to tie up to all
cleats on the side nearest to the dock, op-
erators should do so. MasterCraf also rec-
ommends using fenders to cushion the side
of the boat in the event of water motion.
Otherwise, the boat gel coat and graphics
may be damaged, and such damage is not
covered under the warranty.
Horn
Models:
All.
Purpose:
The horn allows the boat operator to
alert other boaters by way of a well-
known and loud sound.
Location:
The horn is sounded by means of a
button on the instrument panel or driv-
er’s armrest. It is a red button.
Operation:
Pressing the button emits a loud and
recognizable noise.
Troubleshooting:
If the horn does not sound, check
the main circuit breaker panel to see
whether the circuit has tripped and
needs to be re-set. If the circuit does
not require re-setting, there may be an
issue elsewhere in the system. Present
the boat to an authorized MasterCraft
dealer for repair.
Mirrors
Models:
All. In addition to the standard mir-
ror, an optional mirror featuring differ-
ent styling is also available. All mirrors
function in the same fashion.
B O A T O P E R A T I O N S
… 125 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mastercraft X46 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mastercraft X46 in the language / languages: English as an attachment in your email.

The manual is 5,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info