614265
123
Zoom out
Zoom in
Previous page
1/285
Next page
Page 4-14 2014 MasterCraft Owners Manual • Boat Operations
B O A T O P E R A T I O N S
guishers, pull the pin and squeeze the
trigger (re handle) to operate. Every-
one on board a boat should be familiar
with how the manual system overrides
and the re extinguishers operate. It is
the boat owners responsibility to en-
sure that all persons are prepared and
knowledgeable.
Special Attention:
In case of an engine compartment
re, shut down the engine and blow-
ers before manual discharge, or im-
mediately following the automatic
discharge. Boats are equipped with
a discharge indication light at the in-
strument panel or on the video display
gauge at the helm.
After the suppression system has
been used, the re extinguisher canister
will be empty. The boat owner/opera-
tor should have the canister replaced as
soon as possible.
Hand-held units should be replaced or
recharged as soon as possible after use.
Chemical discharge should be cleaned
from all surfaces as soon as possible and
prior to running the boat again, unless
operation is necessary to return to shore.
The boat should never be operated
following a re until after a determina-
tion has been made whether operation
may result in another re. If any dan-
ger of an additional re exists, the boat
should be towed to shore or dock rather
than running the engine.
Consumers who choose to purchase
re control equipment from resources
other than MasterCraft must follow the
instructions and requirements as listed
within the engine compartment regard-
ing suitability for the compartment vol-
ume. These standards are established
by the ABYC (American Boat and
Yacht Council).
override varies by model, but gener-
ally is in the vicinity of the helm. Fire
extinguishers also have various loca-
tions within the boat, but all are easily
accessible. Be certain to determine the
location of all re suppression and ex-
tinguishing units on the boat. Your au-
thorized MasterCraft dealer can assist
you.
Operation:
It is also possible to activate the sys-
tem manually on the HFC-227 system
only. Pull the pin with the red tag, and
then pull the red re handle to set the
system in operation. On the re extin-
123


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mastercraft X46 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mastercraft X46 in the language / languages: English as an attachment in your email.

The manual is 5,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info