Manual Mastercraft X30 (page 222 of 285) (English)

614263

222

Zoom out

Zoom in

1/285

 It is desirable to keep the fuel’s tem-

peraturebelow80F.(26C.)Thegumming

will increase as temperatures increase.

 NotethatfuelstabilizersworkONLYin

freshgasoline.Stabilizerswillnotcureoxy-

genated gasoline. Adding a stabilizer when

the boat is being prepared for outings after

storage will NOT clean the gumming that

has occurred or remove water from the fuel

tank or otherwise eliminate any problems

thathaveoccurredduetofailuretoproperly

preparethefuelingsystemforstorage.

Engine manufacturers suggest using

Federal or State of California reformulated

gasoline whenever possible as it stores as

well or better than conventional gasoline.

Even quality gasoline that has been

properly prepared for storage should

never be stored for a period to exceed

one (1) year.

Fuel systems on all boats MUST be properly

prepared for storage periods exceeding two

(2) weeks, as outlined in this Owner’s Manu-

al. Failure to do so will void the warranty.

General Power Package Preparation

Step 1: Lubricate the throttle and shift

linkages and cables with multi-

purpose grease.

Step 2: MasterCraft recommends that

batteries be removed from the

boatforwinterstorage.Batteries

shouldbefullychargedbeforebe-

ingstoredinacool,drylocation,

protected from the elements and

fully re-chargedbefore being re-

installed in the boat. Never store

batteries close to heat, spark or

ame-producing devices.

Step 3: Leave the engine box cover

propped open about two inches

(2”) to ventilate the engine com-

partment.

Other Winterization Preparations

Step 1: Removethe bilge drain plugim-

mediatelyaftertakingtheboatout

of the water. After a general bow-

to-stern washing, raise the bow

of the boat higher than the stern

to allow as much water as possi-

ble to drain from the bilge, while

performing other storage prepara-

tions.

Step 2: Thoroughly clean the hull, deck

and interior of the boat as soon

as it is removed from the water.

Cleaning at this time is easier be-

cause any marine growth is still

wet.Besuretoallowafewdays

of air drying to prevent mildew

that results from trapped mois-

ture. (See the Cleaning section of

this Owners Manual.)

Step 3: Applyacoatofwaxtotheentire

surface of the boat. We suggest

MasterCraft Premium Marine

Wax for excellent coverage.

Step 4: Iftheboatisequippedwithaheat-

er, shower or ballast bags/tanks,

be sure to disconnect the hoses

anddrainanyremainingwaterin

the lines to avoid freezing. Even

smallamountsofwaterinanyof

these areas can cause signicant

damage upon freezing, and such

damage is not covered under the

warranty!

Care and Maintenance • 2014 MasterCraft Owners Manual Page 6-29

C A R E A N D M A I N T E N A N C E

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mastercraft X30 in the language / languages: English as an attachment in your email.

The manual is 5,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mastercraft X30 Manual

Product: