614263

Mastercraft X30 Manual

218
Zoom out
Zoom in
Previous page
1/285
Next page
Inspect the Complete Fuel
System for Leakage and Change
Fuel Filter
Although the boat engine is similar to
an automobile engine, the engine compart-
ment differs substantially. The underside
of an automobile engine compartment is
totallyopentotheatmosphere.Thisallows
complete air circulation and ventilation. A
boat engine is housed in a closed compart-
ment, the underside of which is the bottom
(hull) of the boat.
The enclosed engine compartment limits
theventilationofgasolineandoilfumes.Be-
causeconnedgasolinevaporsmixedwitha
little air can form an explosive atmosphere, it
isimportanttobeespeciallyvigilantinper-
forming the following two (2) operations:
Step 1: Inspectthe boat bilge areaunder
the engine for the evidence of
oil and gasoline—or any gaso-
line odor. This inspection should
take place the rst time the boat
isstartedeachday.Raisetheen-
ginecoverandvisuallylookatthe
bilge area under the engine.
Step 2: Runthe bilge blower for at least
four (4) minutes to ventilate the
bilge area each time before start-
ing the engine.
Gasoline is explosive. If a gasoline odor is
present or gasoline is visually observed in
the bilge area during inspection, DO NOT
START YOUR ENGINE! Remove the ignition
key from the ignition switch and call an au-
thorized MasterCraf dealer for service.
Note: If there is evidence of loose fuel
ttings, deteriorated lines or other prob-
lems associated with the fuel system, call
an authorized MasterCraft dealer. Fuel
system service on later-model MasterCraft
boats requires special service tools and
special training. Due to the potential for
serious consequences when errors occur
in servicing the fuel system, MasterCraft
strongly encourages all boat owners and
operators to seek professional assistance
from an authorized MasterCraft dealer’s
service department whenever any service
Care and Maintenance • 2014 MasterCraft Owners Manual Page 6-25
C A R E A N D M A I N T E N A N C E
… 218 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mastercraft X30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mastercraft X30 in the language / languages: English as an attachment in your email.

The manual is 5,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info