Manual Mastercraft X30 (page 217 of 285) (English)

614263

217

Zoom out

Zoom in

1/285

Page 6-24 2014 MasterCraft Owners Manual • Care and Maintenance

C A R E A N D M A I N T E N A N C E

Work the steering wheel back and

forthandre-applygreaseifneces-

sary.

Step 6: Usingtheexibleendofagrease

gun, give two (2) full shots of

white lithium grease to the two (2)

greasettings:oneontherudder

shaft, and one on the pivot. Clean

upanyoldgreasepurgedfromthe

areas.

Step 7: Rotate the steering wheel back

and forth several times to work

the lubricant in.

Step 8: Re-installtheaccesspanel.

Lubricate the Shift and

Throttle System

Because this process should be completed

while all movable components of the drive

train are NOT in motion, MasterCraft rec-

ommends this be done while the boat is out

of the water.

Step 1: Ensure the engine is OFF and dis-

connecttheenginesafetystarting

switch. Be sure that the throttle/

shift control lever is in neutral.

The engine must be cool.

Step 2: Open the engine box and locate

the shift and throttle cable ends.

Step 3: Shift to full-throttle-forward.

Step 4: Lubricatethecableendsandcon-

nections with a coating of wa-

terproof marine multi-purpose

grease.

Step 5: Lubricatethepivotsandlinkages

with a light grease.

Step 6: Shift the control lever from full-

throttle-forward to full-throttle-

reverse several times to work the

lubricant in.

Check the Ballast Pump Impeller

This applies only to boats equipped with

some type of ballast system. The number of

ballast pumps varies from system to system.

Authorized MasterCraft dealers can pro-

vide guidance to locate any and all pumps.

Step 1: Remove two (2) of the cover

screws and loosen the third screw.

Retainthescrewsforthereinstal-

lation process. Swing the cover

outofthewaytoallowaccessto

the impeller location.

Step 2: Using needle-nose pliers, pull the

old impeller out of the casing.

Step 3: Install a new impeller. (It is in-

tentionally larger than the case.

Whilegently squeezing itin, en-

sure that the paddle wheels angle

in the same direction—counter-

clockwise—allthewayaround.)

Step 4: Slide the plate back into place.

No silicone is necessary. Due to

the built-in gasket, tightening the

screws should prevent leakage.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mastercraft X30 in the language / languages: English as an attachment in your email.

The manual is 5,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mastercraft X30 Manual

Product: