705279
5
Zoom out
Zoom in
Previous page
1/7
Next page
FRONT PANEL FUNCTIONS NOTES
11. PRESENCE
Controls the amount of higher frequency
content in your sound. Turn clockwise
to add bite for a more cutting tone.
PRESENCE is an power-stage function
and acts independently of the preamp
EQ network.
12. RESONANCE
Controls the amount of lower frequency
content in your sound. Turning this
control clockwise adds a resonant
bass boost, increasing bottom end.
RESONANCE is a power-stage function
and acts independently of the preamp
EQ network.
13. REVERB
Controls the overall REVERB level.
14. OUTPUT
This three position rocker switch
combines STB (standby) and HIGH/
LOW output power functions. The
output stage and power control for this
amplier has been designed to deliver
the optimum tonal performance at
all power levels. The HIGH and LOW
output functions allow the user to
choose between two congurations of
the internal power supply. These two
congurations give the choice between
two output power levels, but ensure that
the output valves behave in the same
way for both. This means the amplier
can be put into LOW power mode
without compromising on tone.
HIGH: This is the 20 Watt high power
setting.
STB (standby): This is used in conjunction
with the mains POWER switch (Front Panel
Function #15). When powering up, always
switch mains POWER on rst, leaving
the OUTPUT switch in the STB (standby)
position. Standby mode should also be
used to mute the amp during breaks in
performances to avoid stress to the valves
of the amplier.
LOW: This is the 10 Watt low power setting.
15. POWER
Mains power switch.
ENGLISH ENGLISH
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marshall DSL20HR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marshall DSL20HR in the language / languages: English as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info