705292

Marshall Code 100 Manual

6
Zoom out
Zoom in
Previous page
1/62
Next page
FRONT PANEL FUNCTIONS (CONT.)
15. PRE FX (CONT.)
‘STOMPBOX’ FX
A:>>|<<
A:>>|<<
ENGLISH
Pitch Shifter
Pitch Shifter generates chromatic harmonies with the ability to ne tune. This
enables you to pitch up or down to produce octaves or 3rd, 4th or 5th harmonies.
Pitch Shifter can also produce more discordant, quirkier sounds. Pitch Shifter’s
editable parameters are:
PARAMETER VALUE RANGE DESCRIPTION
Semitone -12 to +12 Selects the pitch of the generated note chromatically
from an octave below to an octave above the note
played.
Fine Tune -50 to +50 Fine tunes the pitch of the generated note.
Regeneration 0 - 10 Adjusts the percentage of the signal fed back into the
Pitch Shifter. Set to zero for a single pitch shifted tone.
Mix 0 - 10 Adjusts the balance between the guitar signal and the
generated note.
Auto Wah
Auto Wah is a dynamic lter, similar to a Wah Wah pedal. A Wah Wah pedal has a
‘rocker’ footplate to control the frequency at which the lter operates. Auto Wah has
no ‘rocker’ footplate, so in ENV Mode the rocker automation responds to input level.
In LFO Mode the rocker motion is fully automated. Auto Wah’s editable parameters
are:
PARAMETER VALUE RANGE DESCRIPTION
Mode ENV & LFO Envelope Filter & Low Frequency Oscillator.
Frequency 0 - 10 Controls the resting frequency, or fully closed posi-
tion, of the Wah, thereby setting how far the lter
opens when playing.
Sensitivity 0 - 10 ENV Mode: Controls how much the Wah opens in
relation to the pick attack.
LFO Mode: Controls the speed at which the Wah
opens and closes. Set to zero and Auto Wah acts as a
xed rocker Wah.
Resonance 0 - 10 Adjusts the magnitude, bandwidth and shape of the
lter’s resonant peak.
FRONT PANEL FUNCTIONS (CONT.)
ENGLISH
A:>>|<<
PREAMP MODELS
OD JVM
OD DSL
OD American
OD Silver Jubilee
JVM410H on OD1 Channel in Red Mode.
JCM2000 DSL Lead 2 Channel.
Classic American higher gain overdrive.
JCM2555 Silver Jubilee Lead Channel.
OVERDRIVE
JTM45™
CL DSL
CL American
CL JVM
Acoustic Simulator
JTM45 2245 on a clean setting.
DSL100H on the Classic Gain Channel, Clean setting.
Classic American pure-valve sound.
JVM410H on the Clean Channel in Green Mode.
Simulates the sound of an electro-acoustic guitar.
CLEAN
Bluesbreaker™
Plexi™
CR American
JCM800™
‘50s British
1962 Bluesbreaker combo overdriven.
1959SLP Overdriven.
Classic American valve overdrive.
JCM800 2203 overdriven (high sensitivity input).
Classic British valve combo overdrive.
CRUNCH
GATE
PARAMETER VALUE RANGE DESCRIPTION
Threshold 0 - 10 Sets the point at which the Gate begins to close.
NATURAL
16. AMP
AMP is short for preamp. MST modelling faithfully recreates classic and modern Marshall
valve tones as well as other famous valve amp tones. Each AMP model creates an authentic
preamp setting. The MST preamp models are classied into three groups: Clean, Crunch &
Overdrive.
Your CODE amplier’s MST preamp models are:
The Natural preamp is designed to be used with external FX without the tonal
colour of an MST modelled preamp. It provides EQ for tonal shaping and access
to the Gate.
If the noise Gate is applied, when your sound level drops below the set threshold
it will activate, preventing any signal below that threshold from passing through.
It progressively attenuates the guitar signal, following its dynamics, to suppress
unwanted noise.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marshall Code 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marshall Code 100 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 13,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info