442743
5
Zoom out
Zoom in
Previous page
1/9
Next page
6 7
The first 10 programs offered are all Reverbs. Reverberation effects recreate the natural echo
reflections found in physical environments such as halls and rooms or, in the case of plate reverbs, a
mechanically vibrating metal plate. These echoes are extremely complex in nature and are, therefore,
notoriously difficult to recreate. In developing these 10 programs we've gone to great lengths to
ensure that none of the harsh digital ‘graininess’ normally associated with some digital reverbs is
present.
Below is a brief description of each of the 16 DFX programs available:
1 Hall A: this is a large, bright sounding, concert hall. “Wembley Arena, are you ready to
rock!?”
2 Hall B: warmer sounding than Hall A, this program is perfect for adding depth and character
to clean and acoustic tones.
3 Hall C: a medium sized hall with 12ms of delay before the reverb starts.
4 Room 1: a hardwood studio with lots of early reflections. Perfect for acoustic type sounds.
5 Room 2: perfect for adding some subtle ambience.
6 Room 3: warmer sounding than Room 1, perfect for clean or acoustic work.
7 Plate 1: a bright, transparent plate sound ideal for lead work.
8 Plate 2: warmer sounding than Plate 1, this program is great for adding sustain, especially
on clean and acoustic tunes.
9 Plate 3: an accurate emulation of a vintage tube plate reverb. As this program has very little
low end it is great for adding ‘cut’.
10 Gated Reverb: by ‘chopping-off the end of the reverb’s decay ‘tail’ via a Noise Gate, this
program is great for spicing-up chord stabs without cluttering up your sound.
11 Chorus: splitting the signal and then mixing the dry signal with a detuned version creates this
popular effect. To add to the subtle ‘widening’ this creates, the detuned signal is modulated
by an LFO (Low Frequency Oscillator) which causes the detuning to vary. The result is a
subtle, lush sound that is equally effective on both clean and dirty tones.
12 Flange: similar to chorus but much more ‘jet’ like in nature.
13 Delay: this creates an echo repeat of the original signal. The delay time is adjustable in 10
millisecond (ms) increments and can be set to be as long as 1270ms which is well over 1
second.
14 Chorus/Room: as the name suggests, this combines Chorus and a large room Reverb.
15 Chorus/Delay/Room: if program 14 isn't dramatic enough for you then this is definitely the
one for you, as it adds Delay to the Chorus & Reverb mix!
16 Modulation: this effect is similar to the chorus effect but is less subtle and can be used to
create rotary speaker-like effects.
19. DFX Mix Control
(Clean & Overdrive FX)
This determines the level of the internal effects
selected by the Program control (21). In general
you will find that the modulation effects (e.g.:
Chorus, Flange) require more level than the
reverbs and delays. As always, let your ears
decide what is right!
20. Adjust Control
(Clean & Overdrive FX)
For each of the 16 selectable DFX a particular
parameter is adjustable. For example, when a
Reverb is chosen, the decay (how long the
reverb will be heard before it fades away) is
adjustable via this control. The ‘Program/Adjust’
table (22) on the front panel of your amp lists
what the Adjust control does for each of the 16
programs.
21. Program (Clean & Overdrive FX)
This selects each one of the 16 on board digital
effects. The DFX available include single effects
such as Reverb (9 types), Delay or Chorus and
also multi-FX such as Chorus/Delay/Room. To
add further to the flexibility of the DFX sections it
can be switched on and off via the sturdy, 4 way
foot-controller which comes supplied with each
amp.
22. Digital FX Program / Adjust Table
This lists the 16 programs selectable via the
Program control (21) and also indicates which
parameter the Adjust control (20) modifies for
each one. For added convenience, this table is
shown below.
23. Power Switch
Wait for it...yes, this switches the amp on and
off! When the amp is on the power switch is
illuminated and vice-versa. Advanced power
amplifier muting circuitry provides anti-thump
protection on power up and down.
Important Note: As is the case with an all-valve
amplifier, there will be no signal heard until the
amp’s ECC83 preamp valve warms-up and
starts to pass signal. This can take up to 15
seconds so don’t panic!
ENGLISH
ENGLISH
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marshall AVT100X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marshall AVT100X in the language / languages: English as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info