Manual Marshall AVT100X (page 3 of 9) (English)

442743

Zoom out

Zoom in

1/9

2 3

What is AVT?

Advanced Valvestate Technology, or AVT for short, is a major step forward in hybrid amplifier design

which is exclusive to our Advanced Valvestate Series of amplifiers. It has evolved from the original,

critically acclaimed Marshall Valvestate technology, but is improved so that it emulates even more

closely the feel and response of the classic Marshall all-valve power stage...without using valves.

It is not only the power stage that has been significantly improved in the series either. Much careful

attention to detail and many hours of development have also gone into the preamp section too. As a

result, each AVT channel offers the widest possible range of control and shape to your sound, with an

ECC83 (a.k.a.12AX7) preamp valve adding to the all-important tone and feel of these latest Marshall

creations.

Valve Drive Preamp

As just stated, each amp in the range boasts a preamp stage equipped with an ECC83 Dual Triode

valve. Drawing on our vast experience in this field, we have gone to great lengths to ensure that this

precious device delivers maximum sonic benefit at all settings and volume levels. As a result, the

clean sounds ring with the ‘bell-like’ harmonics that only a valve preamp can deliver and the break-up

is never harsh or unnatural sounding. Whenever an AVT Overdrive channel is selected the ECC83’s

dual triode is saturated to its limit, providing the dynamics and feel worthy of a place in the Marshall

hall of fame.

Power Amp Delivery

The same sort of toneful care and attention was also focused on the all-important power stages of the

AVT series too. Our goal was to ensure that each one would create the warm, musical feel and 3-

dimensional sounds that have made our all-valve power amps world renowned. In addition, these AVT

products were designed to deliver the goods in the often hostile and unpredictable environment of the

live performance stage - which is why all the AVT power amps, from the AVT50X upwards, are fan

cooled for optimum reliability.

'Extended Bass Response' Loudspeakers

Knowing how important the relationship between the amplifier and speaker is, this is another area

where we spent a great deal of time and effort when developing the AVT Series. By working extremely

closely with our long-term colleagues at Celestion Loudspeakers, we have successfully developed a

range of speakers which, through radical design, re-define the state-of-the-art in rock guitar

reproduction. In a nutshell, they allow the compact closed back cabinets used in the AVT range, to

maintain the bottom end delivery normally only associated with a full 4 x12 cabinet set-up.

DFX Onboard

At Marshall our aim is to create products that offer our fellow guitarists true inspiration in the practice

and performance of their art. When integrating DFX (Digital Effects) into the tonal topology of AVT, the

greatest care was taken to ensure that the highest level of signal integrity was maintained. Through

careful shaping and mixing of the ‘wet’ (processed) and ‘dry’ (unprocessed) signals, we have ensured

that the onboard effects enhance your tone while adding none of the nasty, artificial ‘grain’ often

associated with DFX. Different effect types can be assigned to the Clean and Overdrive channels and

can, of course, be turned on and off via the sturdy 6-way LED foot controller supplied with your amp.

I. The Pre-amp Section

Your AVT100X combo amp boasts three

independent channels: Clean, Overdrive 1 and

Overdrive 2. The preamp section is where the

gain, tone and relative volume of these three

channels is determined.

1. Input Jack Socket

This is where you plug your guitar into the amp.

You must always use a screened (shielded)

guitar cable and never use an unscreened

(unshielded) speaker cable. Also, this cable

should be one of good quality. If you are in any

doubt regarding this, your Marshall dealer will be

more than happy to help and advise you.

2. Clean Channel Selector Switch

This allows selection of the Clean channel via

the front panel.

3. Clean Channel Gain Control

This rotary control regulates the drive into the

two cascaded valve stages of the preamp.

Lower settings will give you a wide range of well

defined, warm clean tones.

At higher Gain settings you will pass through

natural, valve-induced compression and into an

increased level of desirable ‘break-up’ (a.k.a.

‘crunch’) which is perfect for subtly overdriven

blues/rock.

4. Bright Switch

Most of the Gain controls in classic Marshall

amps have been fitted with what is known as a

‘treble bleed capacitor’. This device allows extra

high frequencies to be ‘bled’ through to the drive

section when the Gain control is at low settings.

Engaging the Bright Switch will ‘bleed’ extra high

frequencies into the drive stage of the Clean

channel, giving you a bright, clean tone perfect

for many styles, including funk and country.

The higher the Gain control is set, the less effect

the ‘treble bleed capacitor’ has. As a result, at

maximum Gain settings, the bright switch will

have no audible effect at all.

5. Clean Volume Control

As its name suggests, this control determines

the volume of the clean channel. The actual

setting you choose will be dependent on how

loud you want the channel to be, and also on

the type of sound you have selected on the pre-

amp. Due to the remarkable realism of our

Advanced Valvestate Technology, once the

Volume control is turned-up past a certain point

the preamp will start to push the power amp

section into creating its own, desirable distortion

- just like an all-valve Marshall amp. When this

occurs, the AVT’s power amp will start to add

musical harmonics, compression and ‘break-up’

into your sound.

Note: As each channel has its own volume

control, you can easily balance the levels of all

three channels as you so desire. Once set to

your satisfaction, these controls can be left

alone and you can use the amp’s Master

Volume knob (16) to set your overall volume

level.

6. Clean Tone Controls

The Clean channel is equipped with rotary Bass,

Middle, and Treble controls. These three

passive EQ controls are designed to achieve

maximum tonal variation from your AVT

amplifier. Just like the tone controls on our

famous all-valve amps they are highly inter-

dependent on each other. As a result, the way

each one functions depends on the exact

position of the other two controls. This is

especially true of the Bass and Treble controls

in relation to the Middle control. As you will

discover, the lower the Middle control is set, the

more ‘reactive’ the others become.

As tone is very much down to personal taste,

experimentation and experience is probably the

best way of learning how these three controls

will affect your sound. To offer you some

guidance, suggested settings are shown later on

in this manual.

* Points to remember are:

When selecting a sound on any amp:

a) The tone and output level coming out of each

guitar is as widely variable as guitars

themselves. Remember, guitars and also

pickups are not designed (nor intended) to be

equal. Therefore, amp settings will vary to suit

both your guitar and your playing style, and, by

necessity, are at your discretion.

b) The tone of your sound is also dependent on

the way you set-up the Volume, Gain and Tone

controls of your amp. Taking the time to adjust

them to taste will further enhance the sonic

textures of your

As is true of all the best

AVT100X Front Panel FeaturesIntroduction

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marshall AVT100X in the language / languages: English as an attachment in your email.

The manual is 2,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marshall AVT100X Manual

Product: