522864

Marquant VP12S4 Manual

26
Zoom out
Zoom in
Previous page
1/37
Next page
20
ENGLISH
– Cinema
Auto : Automatically selects the cinema mode when a video signal is input.
NTSC: 3-2 pull down, PAL: 2-2 pull down
Off : Pull-down processing is not performed.
– VCR Mode
On : A projector is forced into the intra-field only deinterlacing mode.
Off : A projector is used with external field memories and operates in the full set of deinterlacing
modes, i.e., motion adaptive video deinterlacing and full frame film source deinterlacing
using 3:2 pulldown detection (2:2 pulldown for 625/50 sources).
– Black level
Select the black level by a video source.
– FRC (Frame Rate Conversion)
Auto : Frame Rate Conversion function is basically off. However FRC turns on automatically
depending on vertical frequency of input signal.
On : Frame Rate Conversion function is “On”. (60Hz fixed)
– Picture Shift V
When Aspect on the Picture Adjust menu is set to “Zoom”, this setting allows the user to move the
projected image vertically in order to see parts on the image not appearing on the screen.
– Luminance Gain
This menu allows the users to set the luminance gain.
– Chroma Delay
This menu allows the users to set the chrominance delay.
Notes :
• There are some parameters can not adjust according to input signal.
• The settings made in Fine Menu 2 are saved in each currently selected input signal source.
Standard 1
Cinema
VCR Mode
Black Level
Auto
On
0 IRE
FRC Auto
0
0
0
Picture Shift V
Luminance Gain
Chroma Delay
Picture Adjust
Fine Menu 1
Fine Menu 2
Input Signal
RGB/HD Adjust
Display
OSD/Blanking
Config.
Fine Menu 2
By adjusting this Fine Menu, you can make fine picture adjustment.
– Sharpness
Adjust the sharpness.
– Noise Reduction
Adjust the noise reduction.
– R Gain
This menu allows the users to set the gain for red.
– G Gain
This menu allows the users to set the gain for green.
– B Gain
This menu allows the users to set the gain for blue.
– R Bias
This menu allows the users to set the bias for red.
– G Bias
This menu allows the users to set the bias for green.
– B Bias
This menu allows the users to set the bias for blue.
Note :
• The settings made in Fine Menu 1 are saved in the currently selected Picture Mode index (Default
excluded).
Standard 1
Sharpness
Noise Reduction
R Gain
G Gain
B Gain
0
0
R Bias
G Bias
B Bias
0
0
0
0
0
0
Picture Adjust
Fine Menu 1
Fine Menu 2
Input Signal
RGB/HD Adjust
Display
OSD/Blanking
Config.
Fine Menu 1
Adjustments
-25
Ô
0
Ô
25
050
-50
Ô
0
Ô
50
-50
Ô
0
Ô
50
-50
Ô
0
Ô
50
-50
Ô
0
Ô
50
-50
Ô
0
Ô
50
-50
Ô
0
Ô
50
Item
Sharpness
Noise Reduction
R Gain
G Gain
B Gain
R Bias
G Bias
B Bias
Item
Cinema
VCR Mode
Black level
FRC
Picture Shift V
Luminance Gain
Chroma Delay
Adjustments
Auto, Off
On, Off
0 IRE, 7.5 IRE /Normal, Expand (For HDMI input)
Auto, On
-50
Ô
0
Ô
50
-50
Ô
0
Ô
50
-5
Ô
0
Ô
5
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marquant VP12S4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marquant VP12S4 in the language / languages: English as an attachment in your email.

The manual is 3,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info