163890
10
Zoom out
Zoom in
Previous page
1/34
Next page
99
1818
2. Common Operation
1. To turn on/off the unit
Under power off mode, press the POWER button to turn on the unit.
2. To select function mode
Press the MODE button to select RADIO, DISC(After inserting a disc), USB
(After inserting a USB storage) mode.
3. To adjust sound level
R
5. To display and adjust the clock time
6. To select a preset EQ mode
Press the EQ button to select the preset music equalizer curves: CLASS, ROCK,
. The sound effect will be changed.
¡ã¡ã
Under power on mode, long press the POWER button on the front panel or
briefly press the POWER button on the remote controller to turn off the unit.
otate the VOL knob on the front panel or press or hold the + or - button on the
remote controller to directly adjust the volume level.
4. To mute sound
Press the MUTE button on the remote controller to turn on/off MUTE mode.
Briefly pressing the POWER button on the front panel also can turn on/off
MUTE mode.
In MUTE mode, the MUTE mode can be released by pressing the following
buttons: MUTE, EJECT, VOL or +/-, SEL, POWER, MODE.
Press the CLK button on remote controller to display clock time on the small
monitor of the front panel.
Long press the CLK button to flash hour of the clock, then rotate the VOL knob
on the front panel or press the + or - button on the remote controller to adjust the
hour; and then briefly press the CLK button to flash minute of the clock, then
rotate the VOL knob on the front panel or press the + or - button on the remote
controller to adjust the minute; finally briefly press the SEL button to confirm it.
POP, CUSTOM, FLAT
7. To take away the front panel
Press the RELEASE button on the front panel to detach the front panel from the
unit, then you can remove away the front panel.
8. To select a optimal angle of the front panel
Press the TILT button repeatedly to select a optimal angle as follows:
ANGLE1<-->ANGLE2<--> ANGLE3<--> ANGLE4
Note: for the protuberant LCD unit, you can rotate it from 0 to 90 to the main
unit with your hand.
9. To turn on/off LOUD mode
Press the LOUD button on the remote controller to turn on/off LOUD mode.
When turning on LOUD mode, it will enhance bass level immediately when the
bass is not enough.
10.To reset the unit
Press the RESET button to rehabilitate the distorted program to zero when the
display is wrong or the function buttons are not effective.
11.To adjust the sound equalizer curves and the video output mode
1) To adjust the sound equalizer curves, briefly press the SEL button to display the
list of the sound equalizer curves of BASS(without preset EQ), TREBLE(without
preset EQ), BALANCE, FADER, SUB WOOFER ON/OFF and TA VOLUME, then
press the UP or DN button on the front panel or the >>| or |<< button on the remote
controller to select one of them, and then rotate the VOL knob on the front panel
or press the + or - button to adjust level.
2) To adjust the video output mode, long press the SEL button to display the list of
the video output modes of the Brightness, Contrast, Saturation, Hue, Sharpness,
then press the UP or DN button on the front panel or the >>| or |<< button on the
remote controller to select one of them, and then rotate the VOL knob on the
front panel or press the + or - button to adjust the level.
5.14 Program Playback
It allows you to enter the order in which you want some chapters/tracks in
DVD/VCD/MP3/WMA/CD disc to play.
1 During playback, press the PROG button to enter a program interface as
follows:
for DVD discs for VCD/MP3/WMA/CD discs
2 Use the direction buttons to move cursor onto the desired place for inputting
the sequence number.
3 Use the number button to input desired sequence number of title/chapter/
track with desired sequence.
4 Use the direction button to move cursor onto Play item, then press the OK
button to play the programmed titles/chapters/tracks in programmed order;
only pressing the PLAY button also can play the programmed titles/chapters
/tracks in programmed order.
* To exit program playback, firstly press the STOP button, then press the PLAY
button to enter sequence playback.
* To remove the all programmed sequence numbers, move the cursor onto
Clear item, then press the OK button.
* To change the programmed sequence, move the cursor onto the item you
want to change, input the desired sequence number.
* During VCD playback, if it is in PBC ON mode, at the same time of entering
the state of program playback, it turns off PBC mode.
5.15 Playback the Picture CD in JPEG Format
1. The root menu is displayed on TV when beginning to switch on DISC mode.
At the time, it plays MP3/WMA file.(the TITLE or MENU button is not available).
In the root menu, the left file sort icon is for MP3/WMA file; the middle file sort
icon is for JPEG file; the right file sort icon is for VIDEO file. If one of these 3
file sort does not exist, you can not move cursor onto the file sort icon.
2. When displaying the root menu, press the direction buttons to select your
desired FOLDER, file or file sort icon, then press the OK or PLAY button to
open the FOLDER, or play the selected file, or play only this sort of file.
When displaying the root menu, you can also use the number buttons to
select the serial number of the file and play the file.
When you select a JPEG file sort icon, press the ^ or > button to select the
first JPEG file, then press the v button to select the desired JPEG file, finally
press the OK or PLAY/PAUSE button to display the JPEG picture in full screen
from the selected JPEG picture.
PROG
T C T C T C T C
1__:__ 5__:__ 9 __:__13 __:__
2
3
4
Play Clear
__:__ 6__:__ 10__:__14__:__
__:__ 7__:__ 11__:__15__:__
__:__ 8__:__ 12__:__16__:__
PROG
1____ 5 ____ 9____ 13 ____
2
3
4
Play Clear
____ 6 ____ 10____ 14 ____
____ 7 ____ 11____ 15 ____
____ 8 ____ 12____ 16 ____
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marquant mcr-1290 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marquant mcr-1290 in the language / languages: Dutch, French as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info