Manual Marmitek VideoControl 3 (page 8 of 52) (English, German, Dutch, French, Italian, Spanish)

494248

Zoom out

Zoom in

1/52

Frequently asked questions

I have no picture and no sound.

Check whether all the cables are connected properly.

The infra-red doesn’t work.

a. Check whether the infra-red LED is placed on the sensor correctly.

b. Check whether all the cables are connected properly.

c. Check whether the LEDs on the transmitter and receiver flash up if the IR signal is

activated. You can alter the sensitivity of the receiver by setting the adjustment screw,

see tip 2.

d. The infra-red return channel only works if you are using amplifiers, splitters and

antenna boxes that support return channels. This is usually indicated by the term

‘5-30MHz’ or ‘5-68MHz’. Consult your cable store for more information.

e. Make sure the transmitter cannot control the receiver. The LEDs on the transmit-

ters have to be out of view of the LED on the receiver (acoustic feedback).

f. Make sure that, if you use multiple receivers, these do not all receive an IR signal

at the same time.

g. Prevent interference from other IR sources, such as sunlight, energy lamp

and/or plasma screen.

8 © MARMITEK

VideoControl3_manual_20125_20060704.qxd 11-12-2006 15:32 Pagina 8

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek VideoControl 3 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marmitek VideoControl 3 Manual

Product: