580169

Marmitek SD90 Manual

7
Zoom out
Zoom in
Previous page
1/40
Next page
11 CHANGING THE ADDRESS OF THE SMOKE ALARM
Only change the address when your neighbours also use a Marmitek security system with SD90 smoke
alarms.
Your smoke alarm uses Address 1 as standard. You can change this address to address 2 .. 15. NEVER USE
ADDRESS 16 (this is a special function for advanced use).
Changing the address:
1. Keep the Test button pressed (1) and press the Reset button (4) for a short period. The yellow LED (5)
will light up.
2. Let go of the Test button. The yellow LED will go out. Wait 3 seconds and go to step 3.
3. Now enter the new address, for example, address 5.
4. Press the Test button five times. The yellow LED will light up every time you press the Test button.
5. Wait 20 seconds. The yellow LED will light up a number of times during the 20 seconds.
6. The address has now been changed.
7. You now have to (re)register your smoke alarm with your system. Press the Test button to see if
everything is working correctly. Your Marmitek system should now produce an alarm.
12 FREQUENTLY ASKED QUESTIONS
Does the siren of the smoke detector also go off if an alarm is triggered?
No. The siren in the smoke detector cannot be triggered via the alarm system. It will only go off when it
detects fire/smoke.
How many SD90 smoke detectors can I register?
Every SD90 is registered at the same address. There is no maximum number of smoke detectors.
Is it possible to switch off the audio alarm signal that indicates the battery is almost empty?
No, because of safety considerations this signal cannot be switched off.
Does every SD90 take up the place of a remote control when it is registered?
No, only the first SD90 that you registered takes the place of a remote control.
Any other questions?
Visit www.marmitek.com > Customer Service for the latest list of Frequently Asked Questions.
13 TECHNICAL DATA
Frequency: 433.92MHz
Range: Up to 100m outdoors, up to 30m through floors and walls.
Up to 50m outdoors, up to 15m through floors and walls in combination with
the Marmitek HomeGuard MS8000
Siren volume: 85dB, within 3 meters
Power supply: 9V alkaline block battery
Ambient temperature: 5° C to + 37° C (operation) - 20° C to + 70° C (storage)
relative humidity: 10% to 90%
Dimensions: Diameter: 108 mm, thickness 35 mm
7SD90
TM
ENGLISH
20154_20080208_UG_SD90 12-02-2008 10:51 Pagina 7
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek SD90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek SD90 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info