580168

Marmitek PH7208 Manual

4
Zoom out
Zoom in
Previous page
1/28
Next page
USING THE PH7208
To prevent false alarms the technology used waits for 5 command cycles (20 seconds)
before the siren is activated. After the siren has been activated it emits a piercing two-
tone signal for 4 minutes. After this the siren switches off automatically (or before this
if the alarm is deactivated).
CAUTION: When using Marmitek alarm systems these sirens always operate during an
alarm, regardless of whether the silent alarm function has or has not been switched on!
SIGNAL RANGE
The Marmitek X-10 System is based on power line communication. The range of the
Marmitek X-10 signals very much depends on the local circumstances. On average the
range is a cable length of 80 meters.
FREQUENTLY ASKED QUESTIONS
Does the PH7208 also work during a power failure?
No, the PH7208 receives it power from the 230V mains. The communications from the
station to the PH7208 is also via the 230V wiring.
Do you have any questions that have not been answered above? Then please
refer to www.marmitek.com.
TECHNICAL DATA
Power supply: 230V AC 50 Hz
Siren: Piëzo, 4-fold
Sound pressure: 110dB(A)
Signal sensitivity: 15 mVpp min, 50mVpp max at 120 kHz
Input impedance: > 55 Ohm (P-N) at 120 kHz
Responds to X-10 key codes: Automatically after 5x All Lights On/All Units off
command or 5x ON OFF
Ambient temperature: -10°C to +50°C (operation)
-20°C to +70°C (storage)
Fixing: Wall mounted
Dimensions: 129x81x50mm
4 © MARMITEK
20171_20070126_UG_PH7208_124_176 20-02-2007 13:30 Pagina 4
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek PH7208 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek PH7208 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info