580168

Marmitek PH7208 Manual

3
Zoom out
Zoom in
Previous page
1/28
Next page
PH7208
™
X-10 INDOOR SIREN
SAFETY WARNINGS
• To prevent short circuits, this product should only be used inside and only in dry
spaces. Do not expose the components to rain or moisture. Do not use the product
close to a bath, swimming pool etc.
• Do not expose the components of your systems to extremely high temperatures or
bright light sources.
• Do not open the product: the device contains live parts. The product should only be
repaired or serviced by a qualified repairman.
• In case of improper usage or if you have opened, altered and repaired the product
yourself, all guarantees expire. Marmitek does not accept responsibility in the case
of improper usage of the product or when the product is used for purposes other
than specified. Marmitek does not accept responsibility for additional damage other
than covered by the legal product responsibility.
• This product is not a toy. Keep out of reach of children.
•
The sirens operate on 230V. When the housing is opened some components carry a very
high voltage! Only fit the sirens when the plug has been removed from the wall socket.
• The siren produces an extremely loud noise (110dB(A)). In order to prevent damage
to hearing never stand close to an operating siren!
INTRODUCTION
Congratulations on your purchase of the Marmitek X-10 wireless indoor siren PH7208.
This siren operates in response to X-10 commands. These commands are transmitted
onto the mains by Marmitek alarm systems or by a Marmitek SM10 interface. By using
a universal X-10 transmitter (Model SM10) this additional siren can therefore also be
connected to a security system other than a Marmitek X-10 system.
INSTALLATION
One or more additional sirens can be connected to a security system. In order to activate
them the so-called Unit and House Code on the alarm console or interface must be set to
the same address as the address on the siren. The standard factory setting is A-1. The
address can be set using the code dials. The PH7208 can be connected to any wall socket.
The Marmitek sirens operate without additional wiring. To do so a technology is used
whereby the command to activate the siren is transmitted through the mains. The con-
dition for this is that the sirens are connected to the same phase as the alarm system (or
another group within the same phase where appropriate). If this is not possible then
phase connection filters or repeaters should be used (e.g. FD10, CAT3000).
3PH7208
™
ENGLISH
20171_20070126_UG_PH7208_124_176 20-02-2007 13:30 Pagina 3
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek PH7208 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek PH7208 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info