613067

Marmitek PC CONTROL REMOTE Manual

11
Zoom out
Zoom in
Previous page
1/56
Next page
11PC CONTROL
The search starts after the last registered code. If that was 030, the search starts at 031
until the last possible code and then goes from 000 to 029.
Note: if certain functions of your equipment can’t be controlled you will have to find a
different code for your brand.
4.4. Automatic code search
When searching an unknown code, you can step through the library automatically
(AutoSearch). When your equipment responds, you can stop the searching process and
store the code you found.
Note: as you can dedicate any appliance (TV, DVD, SAT...) to VCR, DVD, SAT or AUX keys,
you need first to enter any 3 digit code for the kind of appliance you wish to control
(found in the code book), i.e.: If you want to program a SAT under the VCR key, enter
ANY SAT code found in the code book and then follow the steps below:
1. Turn on the device you want to control.
2. Press and hold SETUP (4) until the LED indicator (2) lights steadily.
Release SETUP button.
3. Press the mode button (3) that matches the equipment you wish to control.
The LED (2) blinks once.
4. Press Channel+ (9) once. After a few seconds the remote starts stepping through
the code library (fast search, 1 code per second). When the device responds, you can
press Channel+ (9) to switch to slow search (1 code per 3 seconds). You can step
back by pressing Channel- (9) (you can step forward by pressing Channel+ (9) in
case you went too far back). As soon as the device responds again, press the --/- key
(14) to store the code you found.
4.5. Brand search
If your brand is listed hereafter, you have the possibility to use the brand search method
(faster than the "manual" and the "automatic code search").
BRAND CODE BRAND CODE
Philips/Radiola 1 Telefunken/Saba/Normende 4
Sony/Panasonic/JVC/Sharp 2 Grundig/Blaupunkt 5
Akai/Toshiba/Daewoo
Thomson/Brandt 3 Nokia/ ITT 6
1. Turn on the device you want to control.
2. Press and hold SETUP (4) until the LED indicator (2) lights steadily.
Release SETUP button.
3. Press the mode button (3) that matches the equipment you wish to control.
The LED (2) blinks once.
4.
Enter the code corresponding to your brand, point the PC Control Remote in
the direction of your equipment, press Channel+ (9) once only. Continue to point the
PC Control Remote at your equipment until the equipment changes channel (the
remote control sends an IR signal every second. Please wait until your equipment
reacts). When your equipment does react, press on the key --/- (14) to confirm. If you
accidentally miss the code, you can stop the autosearch by pressing Channel- (9) and
by repeatedly pressing this key return to the right code. Press --/- (14) to confirm.
4.6. Identifying codes found
1. Press and hold SETUP (4) until the LED indicator (2) lights steadily. Release SETUP.
ENGLISH
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek PC CONTROL REMOTE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek PC CONTROL REMOTE in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info