613359
4
Zoom out
Zoom in
Previous page
1/40
Next page
4 © MARMITEK
3. CAT5e/CAT6 CABLE REQUIREMENTS
x UTP-, FTP- or STP-cable
x 24AWG or lower
x Solid twisted pair
x 100 ohm at 1MHz
x RJ-45 jack according to EIA/TIA T568B standard
Instead of CAT5e cable, CAT6 cable may also be applied (this offers better quality).
Use a ‘solid twisted pair CAT-5e or CAT-6 cable’ in order to optimise transfer quality.
4. INSTALLATION
In order to check proper functioning of the system, it is advisable to test the set-up
first, using a short CAT-5e/6 cable.
1. Switch off all appliances before you start connecting.
2. Connect the HDMI source (Blu-ray disc player, TV Decoder, Media Centre PC,
etc.) to the MegaView 65/66™ transmitter [1], using an HDMI cable (not
provided).
3. Connect the MegaView 65/66™ receiver to the appliance shown [2] (e.g. HDTV
or projector), using an HDMI cable (not provided).
4. Use one CAT5e/6 Ethernet cable to connect the MegaView 65/66™ transmitter
to the receiver [3].
Attention! The MegaView 65/66™ cannot be connected to an existing home network
(LAN), this may cause damage to the device.
5. Connect the power adapter [4] to the ‘5VDC’ connection on the MegaView
65/66™ and plug the adapter into a socket.
Attention! Do not place the MegaView 65/66™ transmitter or receiver in an
enclosed space, such as a TV cabinet or equivalent. Provide adequate ventilation to
ensure that the product is functioning properly and to protect against overheating.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek MegaView 66 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek MegaView 66 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info