Manual Marmitek MegaView 121 (page 6 of 44) (English, German, Dutch, French, Italian, Spanish)

613356

Zoom out

Zoom in

1/44

6 © MARMITEK

2. Connect the IR extender cable to the MegaView 121™ transmitter [6]

and turn the switch to IR OUT.

x Stick the IR blaster LED near the HDMI source.

x When positioned correctly, one blaster LED can operate all A/V devices

within the same compartment of a cabinet.

x Experiment to find the right position before definitive attachment of the

IR receiver.

Attention! The adhesive strip may cause discolouration on certain

surfaces, or may leave adhesive residue when removed.

7. USAGE

1. Switch on the HDMI source (e.g. TV Decoder or Media Centre PC).

2. Switch on the display device (for instance HDTV or projector) and

select the appropriate input. Usually you will do this by pressing the A/V

or EXT button of your remote control.

3. You will receive images from the connected A/V device immediately.

4. The MegaView 121™ can also be used to operate the HDMI source

from another room, by pointing your own remote control at the IR

receiver and pressing a button.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek MegaView 121 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marmitek MegaView 121 Manual

Product: