613356
5
Zoom out
Zoom in
Previous page
1/44
Next page
MegaView 121™ 5
ENGLISH
1. Switch off all appliances before you start connecting.
2. Connect the HDMI source (Blu-ray disc player, TV Decoder, Media
Centre PC, etc.) to the MegaView 121™ transmitter [1], using an HDMI
cable (not provided).
3. Connect the MegaView 121™ receiver to the appliance shown [2] (e.g.
HDTV or projector), using an HDMI cable (not provided).
4. Use one CAT5e/6 Ethernet cable to connect the MegaView 121™’s
transmitter to the receiver [3].
Attention! The MegaView 121 cannot be connected to an existing home
network (LAN), this may cause damage to the device.
5. Connect the power adapter [4] to the ‘5VDC’ connection on the
MegaView 121™ and plug the adapter into a socket.
Attention! Do not place the MegaView 121™ transmitter or receiver in an
enclosed space, such as a TV cabinet or equivalent. Provide adequate
ventilation to ensure that the product is functioning properly and to protect
against overheating.
6. INSTALLATION IR RETURN
The MegaView 121™ has a built-in “infrared return channel”, which allows
you to operate the connected device from another room or through closed
cabinet doors using your own remote control.
1. Connect the IR receiver to the MegaView 121 receiver [5] and turn
the switch to IR IN.
x Position it so that it is visible to your (infrared) remote control, allowing
it to receive the transmitted commands (up to 6 metres).
x The most logical place for the IR receiver is in the vicinity of your
display device (HDTV or projector).
x By using the supplied adhesive strip, placement is possible virtually
anywhere.
x Experiment to find the right position before definitive attachment of the
IR blaster LED.
Attention! The adhesive strip may cause discolouration on certain
surfaces, or may leave adhesive residue when removed.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek MegaView 121 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek MegaView 121 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info