Manual Marmitek IRRF7243 (page 5 of 64) (English, German, Dutch, French, Italian, Spanish)

494267

Zoom out

Zoom in

1/64

signals simply by unplugging devices from the power line, and testing the

differences in range for your Marmitek system. When e.g. your conclusion

is that e.g. your computer monitor is attenuating the signal, you can use a

FM10 Plug-in Filter between the power line and the monitor to eliminate

the effects.

Known devices which can cause attenuation are:

PC Monitors

PCs with heavy internal power supplies

Old Televisions

Copiers

Fluorescent Lights

Gas Discharge Lamps (Energy Saving Lamps)

3. Some (old) devices are able to disturb the signal by transmitting noise on

the power line. Because the Marmitek X-10 signals are transmitted on 120

kHz, only noise on or near this frequency will have influence on the range.

When you use a FM10 Filter to connect this device to the power line, the

noise will be filtered.

4. The Marmitek X-10 protocol has several mechanism to avoid modules to

be switched on or off by other sources than your Marmitek X-10 Controllers.

However, it is possible that the Marmitek X-10 signals are disturbed by e.g.

baby phones which are in TALK mode (continuous transmission). When

these kind of signals are present on the power line it is possible that the

Marmitek X-10 signals will not come through.

5. The mains do not stop at the front door of your home. Everything that is

attached to mains nearby your home can have influence on Marmitek X-10

signals (e.g. heavy machinery). If you think that your system is influenced by

devices out of your house, it is advisable to install FD10 Phase Coupler/Filter

on each phase entering the house. These filters will block signals coming

into or going out of your house, but will also match the impedance for the

mains. The FD10’s will not only filter but will also couple the phases (please

see 1).

5IRRF7243

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek IRRF7243 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marmitek IRRF7243 Manual

Product: