Manual Marmitek IRRF7243 (page 4 of 64) (English, German, Dutch, French, Italian, Spanish)

494267

Zoom out

Zoom in

1/64

3. Transmitters: Wireless components like remotes. The signals of these

components will be received by a controller with transceiver

functionality (IRRF 7243, TM13 or console of a Marmitek

Security System).

The Transceiver will translate the signals into Marmitek X-10

signals on the power line.

Addresses

Up to a maximum of 256 different addresses can be preset. These are

subdivided into a so-called HouseCode (A to P incl.) and a UnitCode (1 to 16

incl.). The HouseCode can also be set on the controllers, so that the

controllers and modules become part of the same system. The address can be

set either using code dials or by pressing buttons, depending on the type of

module.

The Marmitek X-10 System uses standard commands, which control all units

with the same HouseCode at the same time (e.g. all lights on, all off, etc.).

Signal Range

Range of Marmitek X-10 signals over the Power Line and how to

increase the range.

The Marmitek X-10 System is based on power line communication. The

range of the Marmitek X-10 signals very much depends on the local

circumstances. On average the range is a cable length of 80 meters.

If you have difficulties with the range of your Marmitek X-10

signals, please pay attention to the following facts:

1. When more than one phase is used for your electrical system, it is

necessary to couple these phases for the Marmitek X-10 signals.

For coupling you can use FD10 Phase Couplers/Filters. You only need to

install a Phase Coupler/Filter when your wall outlets and light switches are

divided over more than one phase (more than one group is no problem).

For bigger buildings or longer distances we advice you to use an active

repeater instead of passive FD10’s.

2. It is possible that Marmitek X-10 signals are attenuated by devices and

lights which are connected to the power line. In a normal home situation

this effect is negligible (the Marmitek X-10 system is using active gain

control to eliminate the effects). However, it is possible that a particular

device in your house is attenuating the signals so much that the range of

Marmitek X-10 signals is decreased significantly. When you have range

problems, it is wise to try to locate the device which is attenuating the

4© MARMITEK

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek IRRF7243 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marmitek IRRF7243 Manual

Product: