489107
6
Zoom out
Zoom in
Previous page
1/44
Next page
6 © MARMITEK
The signal is weak:
1. Try another channel (make sure that both units stay switched to the same channel).
2. Remove the transmitter and/or the receiver from the immediate surrounding of the connected
devices. These devices can influence the radius.
7. HOW DO I CONNECT THE GIGAVIDEO580
TM
TO MY PC
The GigaVideo580
TM
can be connected to the ‘TV-out’ or ‘Video-out’ of your PC. The
connection can usually be found on the graphics card. The signal needs to be a so-called
composite video signal’. This is also called ‘CVBS’.
Connecting to a PC can be done to the yellow RCA connector or DIN-plug.
• Yellow RCA connector (RCA Yellow)
If your PC is fitted with this connector, the included yellow plug of the RCA cable can be
directly connected to the yellow RCA connector of your transmitter.
• DIN-plug (S-VIDEO)
If your graphics card is fitted with the S-VIDEO-connector, you cannot directly connect the
transmitter to your PC without using an adapter. This adapter ‘converts’ your S-VIDEO signal
into a composite video signal. This adapter is usually supplied with the graphics card (or PC)
with TV-out.
You can also get this adapter from your Marmitek dealer. (Art.no. 09388).
This standard adapter does not fit to some PCs. If that is the case, please contact the supplier
of the graphics card. To use the TV-out, some settings in the graphics card menu need to be
changed. This is different for each PC and operating system, but usually the correct mode
needs to be selected. Select composite’, ‘CVBSor ‘PAL-G’. More information can usually be
found in the PC manual or graphics card manual. Because there are so many different types of
graphics cards, we cannot offer any support.
To transmit sound, you can use the audio out on the sound card of your PC. Please use an
adapter to convert the 3.5mm plug to a double RCA connection.
8. EXTRA OPTIONS
Extra remote control
If you want to operate your device from various places in your home, or if you want to use just
one single remote control for all your A/V devices, then make your choice from the complete
range of Marmitek universal remote controls; EasyControl or EasyTouch. These replace almost
every remote control you are using at the moment. More information about these so called
universal remote controls can be found at www.marmitek.com.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek Gigavideo 580 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek Gigavideo 580 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info