Manual Marmitek Gigavideo 580 (page 5 of 44) (English, German, Dutch, French, Italian, Spanish)

489107

Zoom out

Zoom in

1/44

eNgLiSH

5GIGAVIDEO580™

5. Connect the other end of the A/V cables to your TV. If your TV has a SCART connector,

you may use the SCART adapter provided, labelled “Receiver”.

6. Switch the power slide switch [B] to ‘ON’.

7. Position the receiver in a convenient location preferably free on all sides and orient the

antenna [K] so that the flat side faces the direction of the transmitter.

5. SETTING UP THE IR EXTENDER FEATURE

1. Connect the included IR Extender to the input [F] at the back of the transmitter.

2. Remove the small paper protective label of one of the IR emitters. Place this IR emitter on

the IR window of the A/V device you want to operate. Affix the emitter very lightly. Before

affixing the IR emitter firmly you are advised to check if the extender works properly.

Therefore point your own remote control at the window on the front of the receiver and

press some of the channel selection buttons. If the channel does not change, the IR emitter

may not be fixed in the right position. The position is sometimes critical.

3. You can use the second IR LED to operate a second A/V device. If you are not using this IR

emitter, don’t remove it!

Another IR emitter LED is mounted at the front of the GigaVideo580

transmitter. If this is

pointed at the IR window of the A/V device from a short distance, you can also accomplish

the infra red return channel that way.

6. FINE TUNING THE GIGAVIDEO580

SET

Make sure your A/V equipment is switched on. Switch on the receiving TV and select the

A/V channel (usually found on the ‘0’ or ‘AV’ button). The picture should now automatically

appear, no tuning is required.

The wireless GigaVideo usually works best when the indented faces of the antennas [K]

on the Transmitter and the Receiver unit face one another. Sometimes however distance,

reflections and other effects in the home may affect the signal so that some adjustment of

either the transmitter- or receiver antenna may be necessary to get the best signal.

If still experiencing difficulties try changing the ‘1234’ channel selector [A] and change the

channel. Remember though both the receiver and transmitter must be on the same channel.

The maximum distance between transmitter and receiver depends on local circumstances.

If you are not getting any signal at all:

Check if the units are connected to mains and if the Power-switch is in the ‘ON’ position.

Check if the Channel slide switch [A] on both GigaVideo units is set to the same number.

Check if the receiving TV is on the correct A/V channel.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek Gigavideo 580 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marmitek Gigavideo 580 Manual

Product: