Manual Marmitek easytouch 35 (page 10 of 80) (English, German, Dutch, French)

122674

Zoom out

Zoom in

1/80

10 MARMITEK

SAT, etc.) on the rubber keypad. Note The Brand Search Method is not available for

CD/Audio appliance.

7. Display will show the Code Setup Screen. Using the table, press and release the

numerical key (0-6) corresponding to desired Manufacturer. Note - pressing "0"

carries out a full library search same as normal Code Search Method.

Brand CODE

Philips/Radiola/Aristona/Erres 1

Sony/Panasonic/JVC/Sharp Akai/Toshiba/Daewoo 2

Thomson/Brandt 3

Telefunken/Saba/Nordmende 4

Grundig/Blaupunkt 5

Nokia/ ITT 6

8. Press and release the Touchscreen "SEARCH" Key.

9. Display will show the Search Setup Screen. Press the Touchscreen "UP" key (or Power

or Play) repeatedly until the Device to be controlled changes channel. Alternatively,

you can use the Channel Up & Down keys. Press and release the Touchscreen "OK"

(or Mute) key to install the Code. Display will return to the Main Setup Screen.

If you accidentally overshoot the Code required, press the Touchscreen "DOWN" or

Channel Down to backtrack through the Library to return to the correct code.

Pressing the Touchscreen "UP" key (or Power or Play) will change direction to forward

again.

10. Repeat this procedure for any other appliance you want to control.

ATTENTION: the Brand Search method does not work for CD and AUDIO.

11. The Brand Search Method entry is now complete. Press and release the Touchscreen

"EXIT" key to return to normal operation.

Notes:

a. When all codes under a Brand have been searched the LED will "error" flash

indicating end of the search and Main Setup Screen will be displayed.

b. The above search procedure assumes that you want to store VCR codes under the

VCR key, Cable codes under CBL, etc. If you want, for example, to store a VCR code

under CBL, etc., then the Mode key must be "primed" for the new appliance. First

follow the "Programming using 3 Digit Code Table" procedure and then enter any

VCR code prior to carrying out the above search steps.

Method B: Programming using the 3 Digit Code Tables

Note: you can dedicate any appliance (TV, DVD, SAT...) to the VCR, DVD, SAT, CD, AUDIO,

CBL and Marmitek X-10 Home Control keys: you need first to enter the 3 digit code

of the appliance you wish to control (found in the code book). In any case, follow the

method below:

1. Make sure your appliance is switched on (for example TV)

2. Activate your ET35 remote by touching the screen

3. Press and hold the Setup key until the LED remains on (this occurs after approximately

2-3 seconds) and display shows the Main Setup Screen.

20055_20061108_UG_EasyTouch_35_touchscreen_remote 09-11-2006 10:22 Pagina 10

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek easytouch 35 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marmitek easytouch 35 Manual

Product: