122674

Marmitek easytouch 35 Manual

9
Zoom out
Zoom in
Previous page
1/80
Next page
9EASYTOUCH 35
1. The remote must be in TV Mode with the "second" display screen being shown.
2. Press and hold the Touchscreen "SLEEP" Key until the LED remains on (this occurs
after approximately 2-3 seconds) and display shows the Sleep Setup Screen.
3. Release the "SLEEP" key.
4. Press and release the numerical keys (01-99) for the time required. The LED will
blink off to indicate keypress acceptance and the remote display will return to
normal operation.
5. TV Sleep Timer now set. Leave the Remote pointing towards the TV with an
unobstructed path. To cancel the Sleep Timer, press and release the Power key in TV
Mode or press and hold the SLEEP key until the remote beeps twice.
6 Programming the Easytouch35
You can program the EasyTouch 35 in three different ways.
1. When your equipment is one of the following six brands (Philips, Sony, Thomson,
Saba, Grundig, Nokia) you can use the Brand Search method. Use method A in this
case.
2. Are you using another brand of equipment ? If so, find your brand in the code book,
and use method B to program your EasyTouch35.
3. If the above two methods are not working, you can use method C: search for the
codes manually.
4. If none of the above methods work with your equipment, you can add the codes
yourself by learning the codes of your original remote. This is explained in chapter 11.
You program the ET35 using the Setup key and following the procedures below. Each
keypress is acknowledged with an LED blink and a beep from the remote. 3 LED blinks
and a beep indicate an incorrect or invalid entry.
Method A: Programming using the Brand Search method
It is possible to search for your appliance’s code by entering the brand of the appliance
you wish to control.
1. Make sure your appliance is switched on. If not switch it on manually
2. Activate your ET35 remote by touching the screen
3. Press and hold Setup key until the LED remains on (this occurs after approximately 2-3
seconds) and display shows Main Setup Screen.
4. Release Setup key.
5. Press and release the Touchscreen "CODE" Key.
6. Display shows the Mode Setup Screen. Press and release desired Mode key (TV, VCR,
ENGLISH
20055_20061108_UG_EasyTouch_35_touchscreen_remote 09-11-2006 10:22 Pagina 9
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek easytouch 35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek easytouch 35 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info