122613
14
Zoom out
Zoom in
Previous page
1/68
Next page
14 MARMITEK
Step 8. If less than 3 keys are required then press the Setup key and go directly to
Step 8.
8. Display will return to the Main Setup Screen. Channel Toggle "P<P" setting routine
now complete. Press and release the Touchscreen "EXIT" key to return to normal
operation.
9. To activate the Channel-Toggle function, press and release the Touchscreen "P<P" key
repeatedly to alternate between the two sets of data you entered.
10 Setting Key Labels:
You can select which keys are shown or "hidden" in the display for each of the Device
Modes. You can select any Touchscreen key for change except for the SCREEN, SLEEP,
SEARCH and P<P keys.
1. Press and hold Setup key until the LED remains on (this occurs after approximately 2-3
seconds) and display shows the Main Setup Screen.
2. Release Setup key.
3. Press and release the Touchscreen "SCREEN" Key.
4. Display will show the Mode Setup Screen. Press and release desired Mode key (TV,
VCR, SAT, etc.) on the rubber keypad.
5. Display will show the SCREEN Setup Screen. This screen comprises the current screen
labels for the Mode plus the SETUP and SCREEN Touchscreen labels will be shown.
You can now press any of the Touchscreen panel keys within the current Mode to
select the individual key label display required. Use the "SCREEN" Key to toggle the
screen keys displayed. To Exit pressing the Setup or Mute keys will save changed key
label selections and display returns to the Main Setup Screen. If you want to edit
another Mode’s key labels then press the other Mode key - the Mode you were in is
saved and display changes to the new Mode for any Label changes.
6. Key Label change routine now complete. Press and release the Touchscreen "EXIT"
key to return to normal operation.
Notes:
1. To reset the displayed Modes key labels back to their Default settings, press and hold
the current Mode key for approximately 3 seconds at Step 4 above until the Main
Setup Screen is shown.
2. These labels are not displayed as part of the Key Label change routine – "SLEEP",
"SETUP", "MACRO", "LEARN", "P<P", "KEY?" and "SEARCH".
11 Code Learning:
The EasyTouch25 offers the possibility to learn IR commands from your original remote.
This can be helpful if the necessary codes are not pre-programmed in the EasyTouch25.
It is possible to learn up to 40 keys per mode.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek easytouch 25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek easytouch 25 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info