122613

Marmitek easytouch 25 Manual

13
Zoom out
Zoom in
Previous page
1/68
Next page
13EASYTOUCH 25
To Delete a Macro:
1. Press and hold the Setup key until the LED remains on (this occurs after approximately
2-3 seconds) and the display shows Main Setup Screen.
2. Release Setup key.
3. Press and hold either the Touchscreen or rubber MACRO key. The LED will blink off to
indicate the keypress acceptance and the Macro Delete Setup Screen will be shown.
Only set Macros will be shown.
4. Press and release the digit key for the Macro that is to be deleted. The LED will blink
off and the Macro is deleted. Use the EXIT key to abort if required.
5. Macro deletion is now complete.
9 Channel toggle key
The Channel-Toggle "P<P" key is a special type of Macro key. The feature allows you to
program in two specific fixed channels and switch between them with a single key-press.
For example, you may want to switch between TV channels 123 and 456. Programming
the "P<P" key will allow you to do this.
Two sets of data are to be entered. Each set of data can be up to 4 key-presses and must
be a minimum of 2. The first keypress in each set must be a Mode key. The following
keystrokes can be any other key (except for Mode, Macro, Setup and Screen) although in
practice, these keys will usually be digit keys. Note: No "shifted" commands can be part
of a "P<P" sequence and a SCREEN keypress counts as a keystroke.
To Program the Channel-Toggle Feature:
1. Press and hold Setup key until the LED remains on (this occurs after approximately 2-3
seconds) and display shows the Main Setup Screen.
2. Release Setup key.
3. Press and release the Touchscreen "P<P" Key.
4. Display will show the "P<P1" Mode Setup Screen. Press and release desired Mode key
(TV, VCR, SAT, etc.) on the rubber keypad.
5. Display will show the "P<P2" Setup Screen. This screen comprises the current screen
labels for the Mode plus the SETUP and "P<P" Touchscreen labels will be shown. You
can now press up to 3 keys (a minimum of 1 key must be pressed). Use the
"SCREEN" Key to toggle the screen keys displayed – this counts as a keypress. When
3 keys are entered you will automatically continue to Step 6. If less than 3 keys are
required then press the Mode key and go directly to Step 7.
6. To enter the second set of data, press and release desired Mode key (TV, VCR, SAT,
etc.) on the rubber keypad. Display will again show the "P<P2" Setup Screen.
7. You can now press up to 3 keys (a minimum of 1 key must be pressed) for the
second set of data. Use the "SCREEN" Key to toggle the screen keys displayed – this
counts as a keypress. When 3 keys are entered you will automatically continue to
ENGLISH
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek easytouch 25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek easytouch 25 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info