122830
13
Zoom out
Zoom in
Previous page
1/98
Next page
At the “add an X-10 device!” screen, press the OK key.
Use the Side Key to Pick Device.
Press the Security Side Key.
Press the Side Key to select the SC9000.
At the Security Options screen, press the Side Key to Set Password.
Enter your 4-digit security code using the alphanumeric keys (This is your choice; do
not forget your security code.)
Press the Side Key for the Set Console Link.
Following the screen instructions to set your console to program mode by pressing
and holding the OK key until the console chimes. (Note: Make sure that the SC9000
is in install mode.)
Press the Side Key for Done.(2x)
USING THE REMOTE
Pressing either the or key once at any time accesses the
favourites that you’ve set up. You can select any of your favourites by
pressing the button next to the icon you want.
Pressing either the or key a second time accesses the Marmitek
X-10 Home Automation modules that you’ve set up for All Rooms.
Use the Side Keys or the Navigation Buttons to select the icon you want to control.
Marmitek X-10 RF Devices
Selecting Marmitek X-10 from the MODE key screen displays the Pick
Group screen.
Press the side key for the room that has the device that you want
to operate. (For example, press the Side Key for “Living Room.”)
The screen shows the device icons according to the way “Living
Room” was set up.
Press the Side Key to see an overview of the commands that can be
send. Now press a Side Key to really send this command.
Extended Features
Note: Icons that have additional features follow with additional
screen(s) when you select the icon. This allows you to operate those
features. Some icons will only provide On or Off functions, some may
provide dimming. It depends on the device’s capabilities.
Any Side Key associated with an icon can always be used to operate the features for the
device. In addition, the Main Keys on the EasyIcon10RF remote can be used to operate
Marmitek X-10 devices in unique ways.
Note: Controls for lights are as follows:
Prog up and down turns the light On and Off.
13EASY ICON 10 RF™
ENGLISH
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek easy icon 10rf at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek easy icon 10rf in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info