122830

Marmitek easy icon 10rf Manual

11
Zoom out
Zoom in
Previous page
1/98
Next page
cates that it is sending RF and IR to the TV. If the signals are in Red, it means that the
remote is transmitting IR only.
SETTING UP MARMITEK X-10
Setting Up the EASYICON10RF to operate the TM13 Transceiver using Housecode “B.”
The TM13 Transceiver receives RF signals to control lights and appliances. Do the follow-
ing to setup this transceiver.
• Press the HOME key to display the setup screen. Select Setup.
• Select X-10.
• Select Add/Edit at the next screen.
• Choose the room where you will locate the TM13. For this example choose
Basement.
• Press the Side Key to select.
• At the add an X-10 device screen, press OK.
• Select Pick Device.
• Select Appliances and then scroll until you see the TM13 icon.
Select TM13 using the appropriate Side Key.
• At the following screen select Address.
• Using the Side Keys, select “B.”
• Select Save using the Side Key.
Note: The values in the Address screen must match the physical hardware settings for
the Marmitek X-10 device. In this example, the settings were set to B. This means that
B matches the physical settings for the TM13.
• Use the appropriate Side Keys to create a Label. The Label feature can have two
lines of labels. The example on the right shows a Bath as an “Extra Bath.” You enter
each line of the label by pressing the Side Key for the line number, for example, 1 or
2, and then entering the label using the alphanumeric keys as shown.
• Select Save to save the Label(s).
• Using the Side Keys, Pick Logo and select an appropriate logo (for example, the
bathtub logo on screen 10 of 21).
• Select Save using the Side Key.
• Select Done using the Side Key.
• The Saving Settings screen appears.
USING MARMITEK X-10 FEATURES
After you’ve set up an Marmitek X-10 module, like the TM13 in the previous example,
follow these steps to use the device.
• Press the Mode key to display the various components.
• Select X-10 using the Side Key.
• Select the room that has the Marmitek X-10 device. (In the previous example it was
11EASY ICON 10 RF™
ENGLISH
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek easy icon 10rf at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek easy icon 10rf in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info